SMC Networks SMCEZNET-16SW manual EC Conformance Declaration Class B

Page 8

COMPLIANCES

EC Conformance Declaration - Class B

SMC contact for these products in Europe is:

SMC Networks Europe, Edificio Conata II,

Calle Fructuós Gelabert 6-8, 2o, 4a,

08970 - Sant Joan Despí, Barcelona, Spain.

This information technology equipment complies with the requirements of the Council Directive 89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility and 73/23/EEC for electrical equipment used within certain voltage limits and the Amendment Directive 93/68/EEC. For the evaluation of the compliance with these Directives, the following standards were applied:

RFI Emission:

• Limit class B according to EN 55022:1998

 

• Limit class A for harmonic current emission according to

 

EN 61000-3-2/1995

 

• Limitation of voltage fluctuation and flicker in low-voltage supply

 

system according to EN 61000-3-3/1995

Immunity:

• Product family standard according to EN 55024:1998

 

• Electrostatic Discharge according to EN 61000-4-2:1995

 

(Contact Discharge: ±4 kV, Air Discharge: ±8 kV)

 

Radio-frequency electromagnetic field according to EN 61000-4-3:1996

 

(80 - 1000 MHz with 1 kHz AM 80% Modulation: 3 V/m)

 

• Electrical fast transient/burst according to EN 61000-4-4:1995 (AC/

 

DC power supply: ±1 kV, Data/Signal lines: ±0.5 kV)

 

• Surge immunity test according to EN 61000-4-5:1995

 

(AC/DC Line to Line: ±1 kV, AC/DC Line to Earth: ±2 kV)

 

• Immunity to conducted disturbances, Induced by radio-frequency

 

fields: EN 61000-4-6:1996 (0.15 - 80 MHz with

 

1 kHz AM 80% Modulation: 3 V/m)

 

• Power frequency magnetic field immunity test according to

 

EN 61000-4-8:1993 (1 A/m at frequency 50 Hz)

 

• Voltage dips, short interruptions and voltage variations immunity test

 

according to EN 61000-4-11:1994 (>95% Reduction @10 ms, 30%

 

Reduction @500 ms, >95% Reduction @5000 ms)

LVD:

• EN 60950 (A1/1992; A2/1993; A3/1993; A4/1995; A11/1997)

Warning: Do not plug a phone jack connecto in the RJ-45 port. This may damage this device. Les raccordeurs ne sont pas utilisé pour le systéme téléphonique!

iv

Image 8
Contents Page Page EZ Switch 10/100 User Guide DkhshTrademarks Limited Warranty SMC Networks, Inc Tesla Irvine, CA FCC Class B Industry Canada Class BEC Conformance Declaration Class B Safety Compliance Wichtige Sicherheitshinweise GermanyCompliances Table of Contents Viii Introduction Installing the Switch Description of HardwareMounting the Switch Stacking Switches on a Flat SurfaceConnecting the Switch System Making a Connection to an RJ-45 PortPowering On the Switch Verifying Port StatusVerifying System Operation ApplicationsProduct Specifications Base UnitTroubleshooting Diagnosing Switch IndicatorsPower and Cooling Problems InstallationPort and Cable Assignments RJ-45 Port DescriptionFor Technical SUPPORT, Call For Technical SUPPORT, Call

SMCEZNET-16SW specifications

The SMC Networks SMCEZNET-16SW is a high-performance Ethernet switch designed to meet the needs of small to medium-sized businesses. This device stands out for its robust construction and efficient design, making it a reliable solution for network connectivity.

One of the main features of the SMCEZNET-16SW is its 16 10/100 Mbps Ethernet ports, which allow for seamless networking and efficient data transfer between devices. This plug-and-play switch simplifies the connection of various devices, such as computers, printers, and servers, without the need for complex configurations. With auto-negotiation technology, it automatically detects the speed and duplex of each connected device, ensuring optimal data transmission.

The switch supports the IEEE 802.3 Ethernet standard, providing compatibility with a wide range of devices and peripherals. Additionally, it supports 802.3x flow control for full-duplex mode, which helps prevent packet loss during high traffic situations by managing data flow effectively. This feature is especially beneficial in environments where bandwidth demand can fluctuate dramatically.

In terms of performance, the SMCEZNET-16SW offers a non-blocking architecture, allowing for a maximum switching capacity of 3.2 Gbps. This capability ensures that all ports can be utilized simultaneously without any loss of speed, making it suitable for applications that require high data rates, such as video streaming and large file transfers.

Another significant characteristic of the SMCEZNET-16SW is its compact, fanless design, which leads to quieter operation and reduced power consumption. This makes it an ideal choice for office environments where noise levels are a concern. Furthermore, its energy-efficient design aligns with environmentally friendly practices, helping organizations manage their energy costs effectively.

SMC Networks also provides a reliable build quality, ensuring durability and longevity. The switch comes with a sturdy metal casing and is designed for desktop or rack mounting, offering flexibility in installation to suit various working environments. With its straightforward installation process and dependable performance, the SMC Networks SMCEZNET-16SW remains a solid choice for those looking to enhance their network infrastructure without straining their budget. Overall, this Ethernet switch offers a blend of versatility and efficiency, making it an excellent addition to any business network.