❚❚ Adding another M5 and Hub to a single M5 in use
`` When the M5 in use is connected to the router with a LAN cable
1Disconnect the LAN cable from the M5 in use.
2Connect the HUB to the wireless router with the LAN cable, and then plug in the HUB's power cable.
3Plug in the power cable of the new M5. The new M5's blue LED pairing indicator starts to flash. Wait until the pairing indicator on the M5 stops flashing. When the indicator stops flashing, pairing is complete. The M5 may also beep.
4Turn off the old M5 by disconnecting the power cable. Then. connect it again. Press the SPK ADD button on the back of the M5. The M5's blue LED pairing indicator starts to flash. Wait until the pairing indicator on the M5 stops flashing. When the indicator stops flashing, pairing is complete. The M5 may also beep.
5On your smart device, select the Samsung Multiroom app. Setup starts.
4444
37