SMC Networks SMC8624T manual Cable Labeling and Connection Records

MAKING NETWORK CONNECTIONS

Cable Labeling and Connection Records

When planning a network installation, it is essential to label the opposing ends of cables and to record where each cable is connected. Doing so will enable you to easily locate inter-connected devices, isolate faults and change your topology without need for unnecessary time consumption.

To best manage the physical implementations of your network, follow these guidelines:

◆Clearly label the opposing ends of each cable.

◆Using your building’s floor plans, draw a map of the location of all network-connected equipment. For each piece of equipment, identify the devices to which it is connected.

◆Note the length of each cable and the maximum cable length supported by the switch ports.

◆For ease of understanding, use a location-based key when assigning prefixes to your cable labeling.

◆Use sequential numbers for cables that originate from the same equipment.

◆Differentiate between racks by naming accordingly.

◆Label each separate piece of equipment.

◆Display a copy of your equipment map, including keys to all abbreviations at each equipment rack.

4-8