MOUNTING
Installing an Optional SFP Transceiver into the Switch
RPU
TigerSwitch 10/100/1000 8648T
Figure 3-5. Inserting an SFP Transceiver into a Slot
To install an SFP transceiver, do the following:
1.Consider network and cabling requirements to select an appropriate SFP transceiver type.
2.Insert the transceiver with the optical connector facing outward and the slot connector facing down. Note that SFP transceivers are keyed so they can only be installed in one orientation.
3.Slide the SFP transceiver into the slot until it clicks into place.
Note: SFP transceivers are