INSTALLING THE MODULE
4.Remove the installed module or faceplate: Firmly pull on the screws until the module is free of the switch. Carefully slide the module straight out of the slot.
Keep the original faceplate for future use. If you should remove the module, replace the faceplate to prevent dust and debris from entering the unit and to maintain proper air flow.
Slot 1 | Slot 2 |
5.Insert the new module into the switch: Holding the new module with the text on the front panel upright, carefully slide the module into the lower slot on the rear panel, and press gently until it snaps into place. Be sure the new module’s front panel is flush with the switch panel.
Slot 1 | Slot 2 |
|
5