SMC Networks SMC6724L2GLSC, SMC6724L2GSSC manual Installing the Module

Page 18

INSTALLING THE MODULE

6.Secure the new module: Secure the new module in place by screwing the attached screws clockwise into the switch’s chassis. Tighten them enough to secure the module, but not so tight as to prevent them from being unscrewed by hand.

7.Connect the network cable: Connect fiber cable to the port on the newly installed module. See “Cable Specifications” on page 9 in this guide for further information.

Slot 1

Slot 2

8.Power on the switch: Reconnect the previously removed power sources to the switch. Check the switch's front-panel LED indicators to ensure that the module is operating correctly. Refer to the table of LEDs on page 1 for a description of the LED indications. If the module does not respond, see “Troubleshooting” on page 7.

More details concerning connection options and network applications can be found in the TigerSwitch 10/100 User Guide. Information on the module’s configuration options can be found in the Management Guide that is included with the base unit.

6

Page 17 Page 19
Image 18
Page 17 Page 19
Contents TigerSwitch Module Page TigerSwitch Module User Guide Trademarks Limited Warranty Limited Warranty Compliances FCC Class aEC Conformance Declaration Class a Industry Canada Class a Compliances Table of Contents Viii Description of Hardware Gigabit Port LEDsDescription of Hardware Installing the Module Equipment ChecklistHandling the Modules InstructionsSlot Installing the Module Troubleshooting Troubleshooting Cable Specifications CablesCables Specifications TigerSwitch Gigabit Uplink ModulesSMC6724L2GLSC Ordering Information SMC6724L2FMSTOrdering Information Page Internet
Top Page Image Contents