Utility Installation

English

Step 3: The Device Status shows that "This device is working properly". If there are any error messages displayed here, you will need to right-click the SMC adapter and click [Uninstall]. Then reboot the machine and go through the installation process again.

NOTE: If you completed [Option #1] to install the drivers, then you have already installed the utility as well. Please skip to the next sec-tion. If you completed [Option #2], please complete the steps below to install the utility.

Step 1: Insert the Driver, Utility and Documentation CD.

Step 2: Click [Start], click [Run] and type [?:\Utility\setup.exe]

(Note: The ? equals the letter of your CD-ROM drive. In most cases, this is D.)

Step 3: The installation wizard will begin.

Step 4: Click [Next >] to continue.

Step 5: You will be given the option to choose the location where the Configuration Utility will be installed. It is recommended to leave this at the default value. Click [Next >] to continue.

Step 6: Please set the selection to [Yes] and click [Finish] to reboot the machine. Then once the OS is back up and running, you should see a new icon in your system tray that launches the wireless card utility