Driver Installation Option #2

English

Step 5: You will be given the option to choose the location where the Configuration Utility will be installed. It is recommended to leave this at the default value. Click [Next >] to continue.

Step 6: Please set the selection to [Yes] and click [Finish] to reboot the machine. Then shut down the computer, insert your EZ Connect TURBO Cardbus Adapter or PCI Wireless Card, and boot up your machine again.

Step 7: Once the OS is booted up, it will find the new hardware and automatically install it.

The following are OS specific options that may appear during this installation procedure:

Windows 98: If you are using Windows 98, you must have your original Windows CD on hand. The system will request it near the end of the installation process.

Windows Me: The installation process is fully Plug-and-Play. You will be asked to reboot when the process is complete.

Windows 2000: Click [Yes] if asked to continue the installation with-out a Digital Signature.

Windows XP: Select [Install the software automatically] if asked and click [Next] to complete the installation. Click [Continue Anyway] if a Logo testing window appears.

Continue to the Utility Configuration section for documentation on how to use the utility application for your adapter.

Click on the icon for your OS to view the directions:

Note: Windows 98, Me, 2000 and XP are registered trademarks of Microsoft.