SMC Networks SMC2602W manual

Page 8

Step 2: Insert the Driver CD and select the [Specify a location:] option. Clear the [Removable Media] checkbox. Then press the [Browse] button and look for the drivers on your CD. This should be located in ?:\SMC2602W\WIN9XME. (Note: The ? equals the letter of your CD-ROM drive. In most cases, this is D.) Then click [Next >].

Figure 1.2

Step 3: The system should find the drivers. Click the [Next >] button to continue the installation.

(Note: If the system could not find the drivers, click the [< Back] button, and select the [Display a list of all the drivers] option. Select [Network Adapters] from the list of devices, press [Have Disk] and once again browse to the location of the drivers)

Step 4: Once all the necessary files have been copied, the driver installation is complete. Click [Finish] to exit the wizard.

Step 5: You will then be prompted to reboot the machine. Press [Yes]. Upon reboot, the SMC2602W will be initialized and ready for use.

Image 8
Contents SMC2602W Copyright TrademarksCompliances Equipment Checklist System RequirementsInstallation Instructions Driver Installation Windows Windows ME Page Windows Windows XP Verification Windows 98/Me Windows Windows XP Page Utility Installation Page Utility Configuration Page Page Page Page Page Wireless Distance Table Important Notice Troubleshooting PCI Compatibility Common Installation ProblemsNetwork Connection Problems Frequently Asked Questions What is a Wireless LAN?What is Ad-hoc? What is the 802.11 standard?What is Infrastructure? What is Tx-Rate?What is RTS Threshold? What is Authentication Algorithm?Technical Specifications Standards Wireless Data Rates With Automatic Fall-backNetwork Configuration Radio Signal TypeLED Indicators Temperature RangeAntenna Type ComplianceTerminology Page Page Page For Technical SUPPORT, Call