SMC Networks SMCWCB-N2 manual Wireless Network Status, Infrastructure access point Ad Hoc

Page 22

Link Information

Click the Link Information tab to see general information about the program and its operation.

The following table describes the items found on the Link Information screen.

Wireless Network Status

Profile Name The name of the current selected configuration profile. Set up the configuration name on the Profile tab.

SSID Displays the wireless network name.

Link Status Shows whether the station is associated to the wireless network.

Network Type The type of network the station is connected to. The options include:

Infrastructure (access point)

Ad Hoc

Wireless Mode Displays the wireless mode. 802.11g, 11b or 11n Transmit Rate Displays the current transmit rate in Mbps.

AP MAC Address Displays the MAC address of the access point the wireless card is associated to.

Signal Strength Shows the strength of wireless signal.

19

Image 22
Contents SMCWCB-N2 Limited Warranty Page Important Note FCC Radiation Exposure Statement0560 Compliances Europe EU Declaration of ConformityCompliances ΜΕ ΤΗΝ Παρουσα SMC Networks ∆ΗΛΩΝΕΙ ΟΤΙ Radio LAN devicePage Table of Contents Getting Started with the SMCWCB-N2 Types of Wireless Networks Transmission Rate Transfer RateAD-HOCIBSS Network Page Page Roaming in an ESS network diagram Wireless LAN Security System Requirement About Your Draft 11n Wireless Cardbus AdapterPackage Content LED DefinitionHardware and Wireless Utility Installation Page Page Using the Utility to Configure Your Network Page Wireless Network Status Infrastructure access point Ad HocSecurity Status ChannelTCP/IP Status Connecting to a different network ProfileScan Available Networks WEP WPA/WPA2 BitsAdvanced Settings 802.1xPower Save Mode Long Short AutoWPS Setup PBC Push-button Configuration WPSPage WPS Setup PIN Configuration WPS Status Bar Description Uninstall the Client Utility Uninstall the DriverUpgrading the Wireless Utility Glossary Ssid SMCWCB-N2 SMCWBR11-G