SMC Networks SMCWCB-N2 manual WPS Status Bar Description

Note: You may have to click PIN for few more times to try again. If you still cannot connect to an access point this way, please make sure the PIN code you provided to access point is correct.

WPS Status Bar Description:

1. A successful PIN configuration :

Start PIN connection - SSID ~> Begin associating to WPS AP ~> Associated to WPS AP ~> Sending EAPOL-Start ~> Sending EAP-Rsp (ID) ~> Receive EAP-Req (Start) ~> Sending M1 ~> Received M2 ~> (Received M2D ~> Sending EAP-Rsp (ACK)) ~> Sending M3 ~> Received M4 ~> Sending M5 ~> Received M6 ~> Sending M7 ~> Received M8 ~> Sending EAP-Rsp(Done) ~> Configured ~> WPS status is disconnected ~> WPS status is connected successfully-SSID

2.WPS configuration doesn't complete after two-minute connection: WPS Eap process failed.

3.When Errors occur within two-minute connection, the WPS status bar might report on "WPS Eap process failed".

Error messages might be:

1.Receive EAP with wrong NONCE.

2.Receive EAP without integrity.

3.Error PIN Code.

4.An inappropriate EAP-FAIL received.

29