SMC Networks SMC7003-USB manual LED Functions, Power Requirements, System Requirements

HARDWARE INSTALLATION

LED Functions

The EZ Connect ADSL USB Modem contains two LEDs on the top panel, one is marked “Data” and the other “Power”. The operational status of the modem is indicated by the LED conditions listed below.

LED	Status	Description
Data	Flashing	Indicates the modem is synchronizing its
	Green	ADSL/ATM link with the head end.
	On	Indicates an ADSL/ATM link has been
	Green	established on the RJ-11 port.
Power	On	Power is being supplied to the modem via the
	Green	USB bus.

Power Requirements

USB devices can be either self-powered or bus-powered. A device which has no power connector is bus-powered, and derives its operating power from the USB connection directly. The EZ Connect ADSL USB Modem is bus-powered — all you need to do is plug it into a host PC or self-powered USB hub.

System Requirements

The EZ Connect ADSL USB Modem requires the following PC features to operate:

•A host PC that supports the Universal Serial Bus

•32 MB of RAM and 10 MB of hard disk space

•Windows 98, 98 SE, or 2000 (with installation files ready)

•Standard telephone cable with RJ-11 plugs

2-3