DRIVER INSTALLATION
Prerequisite Information
The following information may be required, depending on the driver you install. Contact your DSL service provider before proceeding with software installation.
•IP Address Settings - the software installation process allows the server to dynamically assign IP Address settings. If your application requires a static setting for specific address information you will need to know the following:
IP Address
Subnet Mask (for Bridged Ethernet applications only) Default Gateway (for Bridged Ethernet applications only)
•Name Server Information - the modem software installation process allows the server to dynamically assign Name Server Address settings. If your application requires a static setting for specific address information you will need to know the following:
Primary DNS Address Secondary DNS Address Primary WINS Address Secondary WINS Address
•Mode (for LAN applications only)
•Virtual Path ID (VPI)*
•Virtual Circuit ID (VCI)*
•Encapsulation type*
•Modulation type*
•User Name (for PPP applications only)
•Password (for PPP applications only)