SMC Networks SMCHP1D-ETH manual

Page 16

Note: You can only set passwords for remote Powerline devices if you have the Device Password (DEK) configured in the SMC EZ Configuration Utility. For information on how to do this, please refer to the previous section.

4.When the wizard has completed, click the [Finish] button to return to the EZ Configuration Utility.

Image 16

Contents Page Copyright TrademarksTABLE OF CONTENTS CHAPTER 1 Introduction Features and BenefitsPackage Contents Minimum RequirementsCHAPTER 2 Getting to Know the Powerline Adapter LED IndicatorsResetting the Powerline Adapter LabelCHAPTER 3 Getting Connected Basic Installation Procedure2. CONNECT the Powerline 1. CONNECT the LANCHAPTER 4 Installing EZ Configuration Utility Windows 98SE/Me/2000/XP2. On the SMC Logo screen, click the Next button to start To install the utility, follow the steps below3. Click the Next button again 8. To complete the Installation click the Finish button Page CHAPTER 5 Using the EZ Configuration Utility Local Device Device ListRemote Device Device Names Delete DevicesCHAPTER 7 Add a Powerline Device CHAPTER 8 Setting a Network Password Page CHAPTER 9 Running the Diagnostic Wizard Page CHAPTER 10 Understand the Diagnostic Report Powerline Devices Host InformationHost Network Connections Network Key Mismatch TestLocal Device Model Configuration Diagnostic Summary ReportLink Quality Summary Table Bridge Information Summary TablePage Appendix A - Product Specification Appendix B - Compliances FCC STATEMENTPHONE Appendix C - Technical SupportINTERNET Rev - 1.0 SMCHP1D-ETH