SMC Networks SMCHP1D-ETH manual To complete the Installation click the Finish button

Page 9

8.To complete the Installation click the [Finish] button.

5.Enter in the Username and Organization information and set access rights, then click the [Next] button to continue.

6.Confirm the installation location, and then click the [Next] button to continue. Default install location is: C:/Program Files/SMC.

Note: You can change the installation location by clicking the [Change…] button.

7.Confirm the Installation information. Then click the [Install] button to begin the process.

8.To complete the Installation click the [Finish] button.

Image 9

Contents Page Trademarks CopyrightTABLE OF CONTENTS Features and Benefits CHAPTER 1 IntroductionPackage Contents Minimum RequirementsLED Indicators CHAPTER 2 Getting to Know the Powerline AdapterResetting the Powerline Adapter LabelBasic Installation Procedure CHAPTER 3 Getting Connected2. CONNECT the Powerline 1. CONNECT the LANWindows 98SE/Me/2000/XP CHAPTER 4 Installing EZ Configuration UtilityTo install the utility, follow the steps below 2. On the SMC Logo screen, click the Next button to start3. Click the Next button again 8. To complete the Installation click the Finish button Page CHAPTER 5 Using the EZ Configuration Utility Device List Local DeviceRemote Device Delete Devices Device NamesCHAPTER 7 Add a Powerline Device CHAPTER 8 Setting a Network Password Page CHAPTER 9 Running the Diagnostic Wizard Page CHAPTER 10 Understand the Diagnostic Report Host Information Powerline DevicesHost Network Connections Network Key Mismatch TestDiagnostic Summary Report Local Device Model ConfigurationLink Quality Summary Table Bridge Information Summary TablePage Appendix A - Product Specification FCC STATEMENT Appendix B - CompliancesAppendix C - Technical Support PHONEINTERNET Rev - 1.0 SMCHP1D-ETH