SMC Networks SMCHP1D-ETH manual To install the utility, follow the steps below

Page 8

To install the utility, follow the steps below:

To install the utility, follow the steps below:

1.Click on the [Install EZ Configuration Utility] option on the splash screen (shown above)

2.On the SMC Logo screen, click the [Next] button to start.

3.Click the [Next] button again.

4. Accept the License Agreement, and click the [Next] button to continue.

Image 8

Contents Page Copyright TrademarksTABLE OF CONTENTS CHAPTER 1 Introduction Features and BenefitsPackage Contents Minimum RequirementsCHAPTER 2 Getting to Know the Powerline Adapter LED IndicatorsResetting the Powerline Adapter LabelCHAPTER 3 Getting Connected Basic Installation Procedure2. CONNECT the Powerline 1. CONNECT the LANCHAPTER 4 Installing EZ Configuration Utility Windows 98SE/Me/2000/XP3. Click the Next button again To install the utility, follow the steps below2. On the SMC Logo screen, click the Next button to start 8. To complete the Installation click the Finish button Page CHAPTER 5 Using the EZ Configuration Utility Remote Device Device ListLocal Device Device Names Delete DevicesCHAPTER 7 Add a Powerline Device CHAPTER 8 Setting a Network Password Page CHAPTER 9 Running the Diagnostic Wizard Page CHAPTER 10 Understand the Diagnostic Report Powerline Devices Host InformationHost Network Connections Network Key Mismatch TestLocal Device Model Configuration Diagnostic Summary ReportLink Quality Summary Table Bridge Information Summary TablePage Appendix A - Product Specification Appendix B - Compliances FCC STATEMENTINTERNET Appendix C - Technical SupportPHONE Rev - 1.0 SMCHP1D-ETH