SMC Networks SMC9452TX manual Further Configuration

INSTALLING AND CONFIGURING NETWORK DRIVERS

Further Configuration

You can modify card settings, install additional protocols and other network components via the Windows NT “Network” applet.

1.Double-click on the “My Computer,” “Control Panel,” and

“Network” icons. The “Network” dialog box appears. Select the “Protocols” tab. If the correct network protocols are not listed in the list box, click on the “Add” button and follow the on-screen directions to select network protocols.

2.Click on the appropriate tab, “Identification,” “Services” or “Bindings,” to add or modify other network components, as needed.

3.To modify other network card properties, click on the

“Adapters” tab and select the EZ Card 1000 in the list box. Then click on the “Properties” button to run the card’s configuration utility. Refer to Chapter 3 for a description of the card’s configuration utility and its options.

2-4