INSTALLING AND CONFIGURING NETWORK DRIVERS
Windows 2000 Installation
The EZ Card 1000 driver for Windows 2000 conforms to the Network Driver Interface Specification (NDIS) 5.0 and can be found in the “\Win2000” directory on the SMC SuperDisk driver diskette.
1.If Windows 2000 is already installed on your computer, proceed to Step 2. Otherwise, install Windows 2000 without the SMC network card installed.
2.Shut down your PC, install the SMC network card, and attach a network cable.
3.Reboot Windows 2000. Make sure you have your Windows 2000 installation CD available, or that you are aware of the path to the installation files on your hard drive.
4.After you have logged in, a “Welcome to the Found New Hardware Wizard” window will appear if Windows 2000 cannot locate the driver. If this window does not appear, Windows 2000 was able to locate the driver and installation is complete. If the window appears, click on “Next.” Select “Search for a suitable driver” and click on “Next.” Select “Specify location” and then type in “A:\WIN2000”, or browse to the WIN2000 folder on the SuperDisk, and click on “OK.”
5.Follow the remaining Windows 2000 instructions to complete the installation.