SMC Networks SMC2670W manual Setup, Smc

Page 14

Section 3 Setup

Typical uses for the SMC EZ Connect 2.4GHz 11 Mbps Wireless Ethernet Adapter:

Ethernet-enabled Printer

PC with Ethernet port

Set-top box, such as Ethernet-enabled cable TV box

Point-of-Sale Terminal with Ethernet port

Stereo Receiver system with Ethernet port

Game Console System, such as Sony Playstation® 2 or Microsoft Xbox®

The EZ Connect Wireless Ethernet Adapter default configuration is:

SSID:

ANY

Wireless Adapter Name:

SMC

IP Address:

192.168.2.25

Subnet Mask:

255.255.255.0

Gateway:

192.168.2.1

 

 

The SMC2670W is a Plug-and-Play device. In most cases, the SMC2670W does not require a configuration to get connected. This seamless installation is because the default SSID configu- ration of the adapter is “ANY”.When the SMC2670W is installed on any one of the ethernet-enabled devices listed above, it will automatically connect to any wireless network within range.

16

Image 14
Contents C 2 6 7 0 W Page Copyright TrademarksCompliances FCC Class BImportant Note Page Page Getting Started Wireless Ethernet Adapter LED Indicators TX/RXResetting the Wireless Ethernet Adapter Understanding Wireless Connections Recommendations for Best Wireless PerformanceAdjusting the Antenna Wireless Distance TableUnderstanding Wireless Security WEP Setup SMCVerify Equipment and Permissions Installing the Utility Software Page Accessing the SMC2670W Using the Windows UtilityPage Using the Web-based Utility Configure Ssid Wireless Ethernet Adapter Name Authentication Type Password Reboot the SMC2670W Security Configure WEP using Windows-based Utility Page Wireless Ethernet Adapter Information Page Page Page Upgrading the SMC2670W Page Uninstalling the SMC2670W Windows Utility Technical Specifications LEDTroubleshooting Using the Web-Based Utility Using the Windows-based Utility Page Glossary Page Page Page Page Limited Warranty Limited Warranty Iii