SMC Networks manual Reboot the SMC2670W

Page 24

3.When you have completed configuring the wireless settings and/or password, click [Apply] to save the settings and reboot the SMC2670W.

4.Log back into the EZ Connect Wireless Ethernet Adapter.

5.Click on the [TCP/IP] section link and then click the [Setup] option.

From this section, you can configure the following settings:

•IP Address

•Subnet Mask

•Gateway

Note: Since the SMC2670W acts as a transparent device on your network, the main function of configuring an IP Address on the Wireless Ethernet Adapter is so you can access the web administration page.

6.When you have completed the Wireless Ethernet Adapter TCP/IP configuration, click [Apply] to save your settings and

26reboot the SMC2670W.

Image 24

Contents C 2 6 7 0 W Page Copyright TrademarksCompliances FCC Class BImportant Note Page Page Getting Started Wireless Ethernet Adapter LED Indicators TX/RXResetting the Wireless Ethernet Adapter Understanding Wireless Connections Recommendations for Best Wireless PerformanceAdjusting the Antenna Wireless Distance TableUnderstanding Wireless Security WEP Setup SMCVerify Equipment and Permissions Installing the Utility Software Page Accessing the SMC2670W Using the Windows UtilityPage Using the Web-based Utility Configure Ssid Wireless Ethernet Adapter Name Authentication Type Password Reboot the SMC2670W Security Configure WEP using Windows-based Utility Page Wireless Ethernet Adapter Information Page Page Page Upgrading the SMC2670W Page Uninstalling the SMC2670W Windows Utility Technical Specifications LEDTroubleshooting Using the Web-Based Utility Using the Windows-based Utility Page Glossary Page Page Page Page Limited Warranty Limited Warranty Iii