SMC Networks SMC2670W manual Configure

Page 21

Section 5 Configure

The EZ Connect Wireless Ethernet Adapter functions as a trans- parent device on your network by not requiring an IP address that is within the same subnet as your network. The steps out- lined below will guide you through the wireless settings and TCP/IP configuration.

Note: If you are using a Barricade Wireless Broadband Router or running a DHCP server with an IP address of 192.168.2.XXX, there should be no configuration required on the SMC2670W.

5.1 Configure the Wireless Ethernet Adapter using Windows-based Utility

1.Log into the SMC2670W using the Windows-based Utility. (see section 4.1 for more information)

2.When you log into the Windows-based Utility, the “INFO” page displays. To change your settings click the [SETUP >] button.

23

Image 21

Contents C 2 6 7 0 W Page Trademarks CopyrightFCC Class B CompliancesImportant Note Page Page Getting Started TX/RX Wireless Ethernet Adapter LED IndicatorsResetting the Wireless Ethernet Adapter Recommendations for Best Wireless Performance Understanding Wireless ConnectionsWireless Distance Table Adjusting the AntennaUnderstanding Wireless Security WEP SMC SetupVerify Equipment and Permissions Installing the Utility Software Page Using the Windows Utility Accessing the SMC2670WPage Using the Web-based Utility Configure Ssid Wireless Ethernet Adapter Name Authentication Type Password Reboot the SMC2670W Security Configure WEP using Windows-based Utility Page Wireless Ethernet Adapter Information Page Page Page Upgrading the SMC2670W Page Uninstalling the SMC2670W Windows Utility LED Technical SpecificationsTroubleshooting Using the Web-Based Utility Using the Windows-based Utility Page Glossary Page Page Page Page Limited Warranty Limited Warranty Iii