SMC Networks 10/100 Mbps manual Specifications

Page 51

SPECIFICATIONS

Port

1 RJ-45 for 10BASE-T and 100BASE-TX

Host Interface

PCI Bus compliant to PCI spec. 2.2

LED

Link, Speed, Activity

Data Bus Access

32-bit bus mastering

Size (without bracket)

120 x 43 mm (4.72 x 1.69 in)

Weight

47 g (1.66 oz)

Power Requirements

5 VDC, 125 mA (typical)

Temperature

Operating: 0 to 55 °C (32 to 131 °F)

Storage: -20 to 65 °C (-4 to 149 °F)

Humidity, non-condensing

10% to 90%

Standards

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3x 100BSE-TX Flow Control support

IEEE 802.1p/Q Quality of Service (QoS)

PCI bus V 2.2, ACPI

OnNow/PC 98, PC 99

DMI 2.0, Wired for Management 2.0

41

Image 51
Contents Fast Ethernet PCI Page Fast Ethernet PCI User Guide Trademarks CopyrightLimited Warranty Limited Warranty Compliances FCC Class BVcci Class B Compliance Japan EC Conformance Declaration Class B Table of Contents Specifications Cable SpecificationsAbout Fast Ethernet PCIFeatures and Benefits Hardware Description RJ-45 LED IndicatorsRemote LAN Wakeup Equipment Checklist InstallationHardware Installation Installation Driver Installation Click Next Check Specify a location, and click Next Driver Installation Installation Software Installation Page Page Installation EtherGuard Installation Page Installation Page Installation WiNeTool Configuration TX/RX Information ConfigurationSend Packet Packet Generator Send Acpi Packet ON/OFF Receive Packet GuageCapture Console Toolbar Filter Setting MAC Address Filter Setting Protocol Filter Setting IP AddressFilter Setting Buffer Size Filter Setting PatternPacket Analysis Receive Packet Detail PCI Compatibility TroubleshootingTroubleshooting Network Card Installation Problems Solutions for Common ProblemsNetwork Connection Problems Cable Specifications Cable and SpecificationsTwisted-Pair Cable and Pin Assignments RJ-45 Pin Assignments Specifications Unix Drivers WarrantyCompliances NetWare ODI DriversPage For Technical SUPPORT, Call