SMC Networks SMC790WBRA4 manual LAN Settings, Dhcp Settings

Page 24

3.4.1LAN Settings

Choose LAN > LAN Settings. In the LAN Settings page, you can configure the LAN network. In this page, you can change IP address of the router. The default IP address is 192.168.2.1. This is the private IP address of the router. This is the address under which the router can be reached in the local network. It can be freely assigned from the block of available addresses.

The following table describes the parameters and buttons of this page.

 

Field

Description

 

 

 

Enter the IP of LAN interface. It is recommended to use an address from a

 

IP Address

block that is reserved for private use. This address block is 192.168.2.2-

 

 

192.168.2.254.

 

 

 

 

 

Subnet Mask

Enter the subnet mask of LAN interface. The range of subnet mask is from

 

255.255.0.0-255.255.255.254.

 

 

 

 

 

 

 

 

Secondary IP

Select it to enable the secondary LAN IP. The two LAN IP address must be in

 

the different network.

 

 

 

 

 

 

Apply Changes

Save the settings of this page.

 

 

 

 

3.4.2DHCP Settings

Choose LAN > DHCP Settings.

Dynamic Host Configuration Protocol (DHCP) allows the individual PC to obain the TCP/IP configuration from the centralized DHCP server. You can configure this router as a DHCP server or disable it. The DHCP server can assign IP address, IP default gateway and DNS server to DHCP clients. This router can also act as a surrogate DHCP server (DHCP proxy) where it relays IP address assignment from an actual real DHCP server to clients. You can enable or disable DHCP server or DHCP proxy.

Select Disable in the DHCP Server Setup page. The page shown in the following figure appears.

21

Page 23 Page 25
Image 24
Page 23 Page 25
Contents SMC7904WBRA4 Contents Snmp Safety Cautions Packing ListLED and Interface Front panel Rear panelFeatures System RequirementsPage Hardware Installation ConnectionPage How to Access the Router Setup WizardPage Following table describes the parameters of this PPPoE VPI VCIPPPoA Dynamic IP Static IP Bridge Route Page Status System2 LAN Wlan 4 WANPort Mapping StatisticTraffic Statistic LAN ARP TableDSL Statistic LAN Settings Dhcp SettingsField Description Following table describes the parameters in this Wlan Basic Settings LANSecurity You can choose Open System , Shared Key , or AutoRadius Advance Settings Ssid TypeAccess Control WDS Settings WAN WAN InterfaceYou can choose Continuous , Connect on Demand , or Manual Default Route Adsl Settings Advance 1 DNSDNS Server Ddns DNSFirewall 2.1 IP/Port FilterMAC Filter Services Virtual ServerURL Blocking DMZ Settings Routing Static Route4.2 RIP IP QoS Anti-dos Other Igmp ProxyUpnp IP PassThrough Admin Remote AccessCommit/Reboot Password Backup/Restore Upgrade FirewareTime Zone System Log Snmp9 TR069 10 ACL Diagnostic PingATM Loopback AdslDiagnostic Appendix a Questions & Answers Page Appendix B Technical Specifications Ethernet Feature Appendix C GPL Anouncement Page Page Page Page Page Page SMC7904WBRA4

SMC790WBRA4 specifications

The SMC Networks SMC790WBRA4 is a versatile broadband router designed to meet the growing connectivity needs of home and small office environments. Renowned for its robust performance and feature-rich capabilities, this device seamlessly combines wireless and wired connections to ensure reliable internet access for various applications.

One of the standout features of the SMC790WBRA4 is its dual functionality as a router and a wireless access point. This dual mode allows users to connect multiple devices ranging from laptops and smartphones to gaming consoles and smart home devices, creating a comprehensive network ecosystem. The 802.11g wireless standard provides up to 54 Mbps of throughput, offering sufficient bandwidth for streaming, online gaming, and web browsing.

Security is a top priority for the SMC790WBRA4, which incorporates advanced encryption protocols including WPA and WPA2. These technologies help safeguard sensitive data from unauthorized access, ensuring that users can browse the internet and conduct online transactions with peace of mind. Additionally, the router features a built-in firewall that adds an extra layer of protection against external threats.

Configuration and management of the SMC790WBRA4 are user-friendly thanks to its web-based interface. Users can easily set up the router, manage bandwidth allocation, and configure parental controls to limit access to specific content or set time restrictions on internet usage. The Quality of Service (QoS) settings further enhance the user experience by prioritizing bandwidth for critical applications, resulting in smoother video streaming and better gaming performance.

With support for multiple WAN connections, the SMC790WBRA4 offers flexibility for internet connectivity. Users can connect via DSL, cable, or fiber, making it adaptable to various service providers. The router also features multiple Ethernet ports for wired connections, allowing for reliable, high-speed access for devices that require a direct link to the network.

In summary, the SMC Networks SMC790WBRA4 is a feature-rich and reliable broadband router. Its combination of wireless and wired connectivity, robust security measures, user-friendly configuration options, and flexibility for various network setups make it an ideal choice for both home users and small businesses looking to enhance their internet connectivity experience.
Top Page Image Contents