SMC Networks SMC790WBRA4 manual Time Zone

Page 54

The following table describes the parameters and buttons of this page.

Field

Description

Select File

Click Browse to select the firmware file.

 

 

Upload

Select the firmware file and click Upload to begin upgrading the firmware.

 

 

Reset

Click it to begin selecting the firmware file.

 

 

3.8.6Time Zone

Choose Admin > Time Zone. The page shown in the following figure appears. In this page, you can set the system time manually or get the system time from the time server.

The following table describes the parameters of this page.

Field

Description

51

Image 54
Contents SMC7904WBRA4 Contents Snmp Safety Cautions Packing ListLED and Interface Front panel Rear panelFeatures System RequirementsPage Hardware Installation ConnectionPage How to Access the Router Setup WizardPage Following table describes the parameters of this PPPoE VPI VCIPPPoA Dynamic IP Static IP Bridge Route Page Status System2 LAN Wlan 4 WANPort Mapping StatisticTraffic Statistic LAN ARP TableDSL Statistic LAN Settings Dhcp SettingsField Description Following table describes the parameters in this Wlan Basic Settings LANSecurity You can choose Open System , Shared Key , or AutoRadius Advance Settings Ssid TypeAccess Control WDS Settings WAN WAN InterfaceYou can choose Continuous , Connect on Demand , or Manual Default Route Adsl Settings Advance 1 DNSDNS Server Ddns DNSFirewall 2.1 IP/Port FilterMAC Filter Services Virtual ServerURL Blocking DMZ Settings Routing Static Route4.2 RIP IP QoS Anti-dos Other Igmp ProxyUpnp IP PassThrough Admin Remote Access Commit/Reboot Password Backup/Restore Upgrade FirewareTime Zone System Log Snmp9 TR069 10 ACL Diagnostic PingATM Loopback AdslDiagnostic Appendix a Questions & Answers Page Appendix B Technical Specifications Ethernet Feature Appendix C GPL Anouncement Page Page Page Page Page Page SMC7904WBRA4