SMC Networks SMC790WBRA4 manual Advance Settings, Ssid Type

The following table describes the parameters and buttons of this page.

Field	Description
SSID TYPE	Select the SSID.
Key Length	Select 64-bit or 128-bit to use data encryption.
	If you choose 64-bit, you can choose ASCII (5 characters) or Hex (10
	characters).
Key Format
	If you choose 128-bit, you can choose ASCII (13 characters) or Hex (26
	characters).
Default Tx Key	Select the default encryption key.
	The Encryption keys are used to encrypt the data. Both router and wireless stations
	must use the same encryption key for data transmission.
	If you choose 64-bitand ASCII (5 characters), enter any 5 ASCII characters.
	If you choose 64-bitand Hex (10 characters), enter any 10 hexadecimal
Encryption Key 1 to 4	characters.
	If you choose 128-bit and ASCII (13 characters), enter any 13 ASCII
	characters.
	If you choose 128-bitand Hex (26 characters), enter any 26 hexadecimal
	characters.
Apply Changes	Save the changes of this page.
Close	Close this page.
Undo	Refresh this page.

3.5.3Advance Settings

Choose WLAN > Advance Settings. The page shown in the following figure appears. These settings are only for more technically advanced users who have a sufficient knowledge about wireless LAN. These settings should not be changed unless you know the effect of the changes on your AP.

28