AM ON/OFF It is possible to block out | LOW EQ | Equaliser setting: | ||
| one or both of the AM wave- |
| To activate the frequencies | |
| bands (MW/LW). |
| and set the level for the low- | |
| This means you will select |
| er frequency range. | |
| only the wavebands you |
| Refer to the detailed instruc- | |
| want when you press BND: |
| tions in the section on | |
| AM ON | – |
| “Equaliser setting”. |
| all wavebands are available |
|
| |
| MW OFF | – LW, FM only | CD NAME | Only available during CD |
| LW OFF | – MW, FM only |
| playback. |
| AM OFF | – FM only |
| Use this function to name |
|
|
|
| your CDs. (See “Entering |
LOUDNESS Loudness - When listening |
| CD names”). | ||
|
| |||
| at a low level, the Loudness |
|
| |
| function creates a more nat- | CD DISP | To select the NAME or | |
| ural sound by boosting the |
| TIME display mode. | |
| low frequency range. |
| Refer to the detailed instruc- | |
| LOUD 1 - Low boost |
| tions in the section on “Se- | |
| LOUD 6 - Max. boost |
| lect display mode”. | |
HIGH EQ | Equaliser setting: | CLK MAN | Switches off the hour cor- | |
| To activate the frequencies |
| rection function. | |
| and set the level for the up- |
| Read the information in the | |
| per frequency range. |
| section on “Clock, Deacti- | |
| Refer to the detailed instruc- |
| vating the hour correction | |
| tions in the section on |
| function”. | |
| “Equaliser setting”. |
|
| |
To quit the DSC programming mode and store the adjustment:
• Press DSC.
Overview of the DSC factory settings
CLOCKSET | - |
VOL FIX | 0 |
CD UPD | - |
PTY LANG | ENGLISH |
READ KC | - |
LEARN KC | - |
SHARX | SHARX ON |
LED | ON |
COLOUR | green |
BEEP | 4 |
LO / DX | DX 1 |
TA VOL | 30 |
SCANTIME | 10 sec. |
STEREO | ON |
AM ON / OFF | AM ON |
LOUDNESS | 3 |
HIGH EQ | 0 dB/630 Hz |
LOW EQ | 0 dB/32 Hz |
CD NAME | - |
CD DISP | TIME |
CLK AUTO / MAN | CLK AUTO |
PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
55
