DSC programming
The car stereo has been equipped with DSC (Direct Software Control) to allow you to customise certain programmable, basic set- tings to suit your personal needs and pref- erences and then store them.
The basic settings for this audio equipment were made at the factory.
In the following you can find an overview of these settings, so that you can always reset to them if desired.
If you wish to alter any of the programming,
•press DSC.
Use the rocker switch and the 
button to select and adjust the functions described in the following. The display will show you the setting you have selected.
CLOCKSET To set the clock manually. Press << >> to set the hours/minutes. Move to the next position (flashing) by pressing 
/
. To store the setting selected, press 
briefly.
Also refer to the section on “CLOCK”.
VOL FIX Use this function to select the volume at which the ra- dio is set when it is switched on.
Adjust the desired volume level with << >>. When ad- justed to “VOL 0”, the sys- tem will come on at the vol- ume selected before it was switched off.
PTY LANG To select the language used to indicate the programme type: DEUTSCH or ENG-
LISH
READ KC To read out the KeyCard data.
The card supplied with the radio is used to display the model name, type number (7 6..) and the serial number.
With the extra card it is pos- sible to display data entered by your specialised dealer.
(See the section on “Short Additional Memory S.A.M.”). If you remove the KeyCard during the reading process, “READ KC” will appear on the display panel.
NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
/
Select function << >> Adjust/recall value
CD UPD Use this function to delete CD names during CD opera- tion to make more storage capacity available for new discs. (See “Deleting CD names with
PORTUGUÊS ESPAÑOL SVENSKA
53
