Blaupunkt RD 148 Clock, Setting the clock, Switching DCF 77 on/off, Automatically

Models: RD 148

1 30
Download 30 pages 42.75 Kb
Page 22
Image 22

Press DSC.

Press / as many times as required until “CD UPD” appears on the display panel.

Press >> to select “CLR DISC” if you want to delete the name of that CD,

or

Press << to select “CLR ALL” to delete the names stored for all of the CDs.

Press for approximately 2 seconds. “UPDATE” will appear briefly in the display. The deletion process is complete.

To quit this function:

Press DSC.

Clock

This car stereo is equipped with a built-in clock which automatically takes advantage either of RDS or the DCF 77 signal (control signal for atomic clocks, used in special cas- es), to ensure highly accurate time-keeping (hours, minutes).

For the clock to function properly with RDS, an RDS station with the CT function (CT – clock time) must be received.

The automatic correction of the time or just the hours using DCF 77 can be switched off.

Switching DCF 77 on/off:

Press DSC for approximately 2 sec- onds.

If the display shows “DCF77 ON”, DCF 77 is active.

If the display shows “NO DCF77”, DCF 77 is inactive.

Setting the clock

a)automatically

The clock is set automatically when the radio is tuned into an RDS station which has the “CT” function (clock time).

If the RDS signal is not received for a week, the radio will attempt to use

DCF 77 to adjust the clock to the cor- rect time the next time the radio is switched off.

Condition: DCF 77 is switched on.

“CLK SYNC” will appear in the display for 20 seconds and you will hear a melody (Big Ben) to indicate that the radio is still active and that the power antenna (if connected) is still extend- ed.

If it is not possible to receive the DCF 77 signal, the radio will switch off after a few seconds.

b)manually with DSC-CLOCKSET

Press DSC briefly, “CLOCKSET” will appear in the display.

Press << >> to set the hours/min- utes. You can move to a different position by pressing /.

After you have set the clock, press briefly to store the new setting.

PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH

49

Page 22
Image 22
Blaupunkt RD 148 Clock, Setting the clock, Switching DCF 77 on/off, Automatically, Manually with DSC-CLOCKSET