SMC Networks SMC7904BRB2 manual Trap

CONFIGURATION PARAMETERS

Trap

Specify the IP address of the NMS to notify when a significant event is detected by the agent. When a trap condition occurs, the SNMP agent sends an SNMP trap message to any NMS specified as a trap receiver.

Parameter	Description
IP Address	Traps are sent to this address when errors or specific events occur on
	the network.
Community	A community string (password) specified for trap management.
	Enter a word, something other than public or private, to prevent
	unauthorized individuals from accessing information on your system.
Version	Sets the trap status to disabled, or enabled with V1 or V2c.
	The v2c protocol was proposed in late 1995 and includes
	enhancements to v1 that are universally accepted. These include a
	get-bulk command to reduce network management traffic when
	retrieving a sequence of MIB variables, and a more elaborate set of
	error codes for improved reporting to a Network Management
	Station.

4-57