CONFIGURING THE BARRICADETM
PPPoA
Parameter | Description |
VPI/VCI | Enter the Virtual Path Identifier (VPI) and Virtual Circuit |
| Identifier (VCI) supplied by your ISP. |
Encapsulation | Select the encapsulation used by ISP from the |
| menu. |
QoS Class | ATM QoS classes including CBR, UBR and VBR |
PCR/SCR/MBS | QoS Parameters - PCR, SCR and MBS are configurable. |
IP assigned by ISP | Select Yes if the IP address was provided by your ISP |
IP Address | Enter the IP address provided by your ISP. For dynamic IP |
| leave this field blank. |
Subnet Mask | Enter the subnet mask address provided by your ISP. For |
| dynamic IP leave this field blank. |
Connect Type | Sets connection mode to Always connected, |
| by traffic or Manual connection. For flat rate services use |
| Always connected. |
Idle Time | Enter the maximum idle time for the Internet connection. |
(Minute) | After this time has been exceeded the connection will be |
| terminated. This setting only applies when the Connect Type |
| is set to |
Username | Enter user name. |
Password | Enter password. |