SMC Networks Barricade specifications Primary Setup

Page 18

4.4 Primary Setup

This option enables the product to work properly. The setting items and the web appearance depend on the type of WAN. Choose the correct WAN.

1.LAN IP Address: The default IP address is 192.168.123.254. You can change it to fit your needs.

2.WAN Type: WAN connection type of your ISP. You can click Change button to choose a correct one from the following four options:

A.Static IP Address: ISP assigns you a static IP address.

B.Dynamic IP Address: Obtain an IP address from ISP automatically. If you are a user of @Home service, please refer to Appendix C.1 for the setup procedure.

C.PPP over Ethernet: Some ISPs require the use of PPPoE to connect to their services.

D.Dial-up Network: To surf the Internet via PSTN/ISDN.

-17-

Image 18

Contents User Guide Trademarks Table of Contents Page Functions and Features IntroductionPacking List Virtual Server supportedHardware Installation Panel LayoutInstallation Requirements Top PanelProcedure for Hardware Installation Power on Network Settings and Software Installation Setting your computer network settings properlyInstall the Software into Your Computers Request timed outPage Page Configuring the Barricade Startup and LogStatus Toolbox Primary Setup Static IP Address Dhcp Server Choose Disable or Enable Dhcp ServerVirtual Server Virtual server mapping table Service Port Server IP Enable Special AP Access Control Miscellaneous Items Configuring on Windows 95/98 Platforms Print ServerPage Configuring on Windows NT Platforms Configuring on Unix based Platforms Appendix a Console Mode Appendix B TCP/IP Configuration for Windows 95/98 Installing TCP/IP protocol into your PCSetting TCP/IP protocol to work with the Barricade Page Don’t input any values in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page Page That’s it. You are now ready to start using your Barricade Appendix C Installation Guide For Specific ISP @HomeMediaOne