SMC Networks Barricade specifications Hardware Installation, Panel Layout

Chapter 2 Hardware Installation

2.1. Panel Layout

2.1.1. Front Panel

Figure 2-1 Front Panel

1 - 4 LAN port socket (RJ-45). These are where you will connect to devices on your local area network. (adapter, hub, or switch, e.g.)

2.1.2. Rear Panel

	Figure 2-2 Rear Panel
PRINT	Parallel port connector (25-pins D-type female). This is where you
	connect the shared printer.
WAN	WAN port socket (RJ -45). This is where you connect to your Cable or
	DSL modem or an Ethernet router.
COM	Serial port connector (9-pins D-type male). This is where you connect
	your 56K modem. (This port is also a console port.)

-6-