Samsung AH68-02290S Speaker Setting, Audio, DPL llz, Level, Distance, Test Tone, English, Setup

Setup

Audio

Speaker Setting

DPL llz

•Off : Select when you place the Surround Back speakers as shown.

•On: Provide a more realistic 3D surround sound with vertical surround system.

Settings	Speaker Setting
Display	DPL IIz	:	◄ Off
Audio	Level
System	Distance
Network
	Test Tone	:	Off
Language
Security
General
Support	sSelect		rReturn

Set the speaker level and distance to obtain the best possible surround sound.

Level

You can adjust the balance and level for each speaker.

Adjusting Front/Center/Surround /Surround Back/Subwoofer Speaker Level

•The volume level can be adjusted in steps from +6dB to -6dB.

•The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

Settings	Level
Display	Front L	:	◄ 0 dB
Audio	Front R	:	0 dB
	Center	:	0 dB
System
	Surround L	:	0 dB
Network	Surround R	:	0 dB
	Surround Back L :		0 dB
Language
	Surround Back R :		0 dB
Security	Subwoofer	:	0 dB
General	Test Tone	:	Off
Support	<Change sSelect		rReturn

Set the speaker level to obtain the best possible surround sound.

Distance

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, center, surround, surround back and subwoofer speakers.

•You can set the Speaker Distance between 1ft(0.3m) and 30ft(9.0m).

Settings	Distance
Display	Front L	: ◄ 10ft (3.0m)
Audio	Front R	:	10ft (3.0m)
	Center	:	10ft (3.0m)
System
	Surround L	:	10ft (3.0m)
Network	Surround R	:	10ft (3.0m)
	Surround Back L :		10ft (3.0m)
Language
	Surround Back R :		10ft (3.0m)
Security	Subwoofer	:	10ft (3.0m)
General	Test Tone	:	Off
Support	<Change sSelect		rReturn

Set the parameters of the distance from the listening position to the speakers.

Test Tone

Use the Test Tone feature to check the speaker connections.

Press the ◄, ► buttons to select All.

•A test tone will be sent to Front Left

Center Front Right Surround Right

Surround Back L	Surround Back R
Surround Left	Subwoofer in order so you can
make sure the speakers are set up correctly.

To stop the test tone, press the ◄, ► buttons to select Off.

Settings	Speaker Setting
Display	DPL IIz	:	Off
Audio	Level
System	Distance
Network	Test Tone	: ◄	All
Language
Security
General
Support	<Change sSelect		rReturn

Listen to the emitted sound from all speakers in sequence.

✎NOTE

When HDMI Audio is ON (audio is produced through TV speakers), the Test Tone function is not available.

34 English