Setup
Before Starting (Initial Settings)
1.Turn on your TV after connecting the product. (When the product is connected to TV for the first time, product will turn on automatically and the Initial Settings screen will be displayed.)
Initial Settings I
Select a language for the
English
Français
Deutsch
Español
Italiano
Nederlands
> Move sSelect
2.Press the ▲▼ buttons to select the desired language, then press the ENTER button.
3.Press the ENTER button to select Start button.
Initial Settings
TV Aspect, Musical Room Calibration and Network will be set.
Each setting may be changed later under "Settings"
Start
a Previous " Select
4.Press the ▲▼ buttons to select desired TV Aspect ratio, then press the ENTER button. (See page 31)
Musical Room Calibration screen will be displayed.
5.Plug the ASC microphone into the ASC IN jack on the product. (See page 35)
6.Press the ENTER button to select Start button.
Initial Settings I Musical Room Calibration
Preparing...
d Skip
Setting the Musical Room Calibration function takes about 3 minutes.
03
7. Press the ◄► buttons to the select the | Setup | |
desired Network Settings: Wired, Wireless or | ||
| ||
PBC (WPS), then press the ENTER button. |
| |
(See pages 39~42) |
| |
The Network Test will start and Initial Settings |
| |
will be completed. |
|
Initial Settings I Network
Network Setting is needed to use various Internet services.
Choose the primary method for connecting to network.
Wired : Set the network by using Ethernet cable.
Please make sure that Ethernet cable is connected.
Wired | Wireless | PBC (WPS) |
a Previous d Skip <Move " Select
8.Press the OK button.
The home menu will be displayed. (For more information about home menu, please see page 30)
•Home Menu
Please activate Internet@TVinternet radio serviceYou Tube
to enjoy a variety of Internet Services.
No Disc a Change Device | d View Devices " Enter |
✎NOTE
When the product is connected to TV for the first time, product will turn on automatically. Do not confuse because this is not malfunction.
The home menu will not be displayed if you do not configure the initial settings.
If you press the BLUE(D) button during the Musical Room Calibration/Network setup, you can access the home menu even if the network setup is not completed yet.
When you return to home menu, the full screen mode will be cancelled automatically.
English 29