Xantech D5KP Internal IR Enable IR INT, External IR Enable IR EXT, Local Source LOCK-OUT Locl DET

Page 21

SETUP PARAMETERS (continued)

INTERNAL IR ENABLE (IR INT)

This setting allows the built-on IR Receiver to be disabled if desired. This feature is useful in the built- in IR receiver is being flooded by a plasma TV, compact fluorescent light or sunlight. The Local IR Receiver input on the rear of the unit remains active regardless of this setting. The built-in IR Receiver is enabled by default.

The settings for this control can be adjusted from ON to OFF only.

EXTERNAL IR ENABLE (IR EXT)

This setting allows the external IR Receiver connection to be disabled if desired. The internal IR Receiver input on the front of the unit remains active regardless of this setting. The external IR Receiver is disabled by default.

The settings for this control can be adjusted from ON to OFF only.

LOCAL SOURCE LOCK-OUT (LOCL DET)

This setting determines if the LOCAL SOURCE can be selected. By default, the LOCAL SOURCE can be selected.

The settings for this control can be adjusted from ON to OFF only.

SOURCE LOCK-OUT (SRC LCK)

This setting determines which sources can be selected in the zone in which the D5KP is installed, allowing for parental control or removing the source selection option if that particular source will not be connected. By default, all connected sources can be selected.

Source lock-out can be set by both the end-user and the installer under the “USR” setting. The installer can keep the end-user from using this feature by using the “ON” setting.

USER PARAMETER LOCK-OUT (USR)

User parameters can also be restricted under Installer Setup. The User parameters that can be restricted are BASS, TREBLE, BALANCE, DRC, LOUDNESS, WHM, and DND. This setting determines which sources can be selected in the zone in which the D5KP is installed, allowing for parental control. By default, all connected sources can be selected by the USR. In “SETUP PARAMETERS”, this is noted by “USR” next BASS, TREBLE, BALANCE, DRC, LOUDNESS, WHM, and DND. If USR is not selected, than these parameters cannot be changed in USER PARAMETERS

- 21 -

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Installation Instructions Safety Information Important Safety InformationOperating Temperatures & Environments D5KP Accessories FeaturesIntroduction Exceptional PerformanceSystem Design Overview/Applications Defining TermsD5KP Amplifier Keypad to Speakers Pre-WiringD5IP Local Sources to the D5KP Amplifier Keypad D5KP Front D5KP Rear D5KP Keypad Installation InstallationZone OUT D5RH ConnectionsZone OUT D5SH, D5SH4 Auxiliary Power Connector AUX Power OUT D5RH and D5SH, D5SH4 External IR Receiver Connections D5IP Source Input Wall PlateDescription Internal IR ReceiverSpeaker Connections D5KP Speaker ConnectionsD5KP Installer Setup User Parameters Do not Disturb DND Whole House Music WHMSetup Parameters External IR Enable IR EXT Internal IR Enable IR INTLocal Source LOCK-OUT Locl DET Source LOCK-OUT SRC LCKSymptom Possible Cause Solution TroubleshootingXantech Limited Warranty Specifications
Top Page Image Contents