Xantech installation instructions D5KP Installer Setup

Page 17

4. D5KP Installer Setup

The D5KP Installer Setup is defined into two categories, “User Parameters” and “Setup Parameters”. User Parameters allows the end-user to change the keypad functionality to his or her needs. Setup Parameters are for the installer to custom create an installation based on the end-users requirements.

PRESS TO ENTER

INSTALLER SETUP

PRESS TO ENTER

USER SETUP

Figure 4.0: D5KP Keypad Parameter Buttons

To access the “User Parameters”, press the “X” MAIN button for 3 seconds and a menu will appear.

To access the “Setup Parameters”, remove the trim plate and press the setup switch.

Use the “SOURCE RIGHT” and “SOURCE LEFT” buttons to move the cursor next to the parameter to be changed. Use the “VOLUME UP” and “VOLUME DOWN” buttons to change the parameters.

- 17 -

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Installation Instructions Safety Information Important Safety InformationOperating Temperatures & Environments D5KP Accessories FeaturesIntroduction Exceptional PerformanceSystem Design Overview/Applications Defining TermsD5KP Amplifier Keypad to Speakers Pre-WiringD5IP Local Sources to the D5KP Amplifier Keypad D5KP Front D5KP Rear D5KP Keypad Installation InstallationZone OUT D5RH ConnectionsZone OUT D5SH, D5SH4 Auxiliary Power Connector AUX Power OUT D5RH and D5SH, D5SH4 External IR Receiver Connections D5IP Source Input Wall PlateDescription Internal IR ReceiverSpeaker Connections D5KP Speaker ConnectionsD5KP Installer Setup User Parameters Do not Disturb DND Whole House Music WHMSetup Parameters External IR Enable IR EXT Internal IR Enable IR INTLocal Source LOCK-OUT Locl DET Source LOCK-OUT SRC LCKSymptom Possible Cause Solution TroubleshootingXantech Limited Warranty Specifications
Top Page Image Contents