Seagate ST91603110CS, ST9250311CS manual Reliability, Measurement type Specification

Page 20

2.13

Reliability

 

 

 

Measurement type

Specification

 

 

Nonrecoverable read errors

1 per 1014 bits read, max.

Annualized Failure Rate (AFR)

<0.55%

 

 

Load/Unload (U/UL)

 

25°C, 50% relative humidity

600,000 software-controlled power on/off cycles

 

 

50,000 hard power on/off cycles

32°C, 80% relative humidity

600,000 software-controlled power on/off cycles

5°C, 80% relative humidity

50,000 hard power on/off cycles

5°C, 10% relative humidity

 

55°C, 16% relative humidity

 

Warranty

 

To determine the warranty for a specific drive, use a web browser to access the

 

 

following web page:

 

 

support.seagate.com/customer/warranty_validation.jsp

 

 

You will be asked to provide the drive serial number, model number (or part num-

 

 

ber) and country of purchase. After submitting this information, the system will dis-

 

 

play the warranty information for your drive.

 

 

 

14

Pipeline HD Mini Series SATA Product Manual, Rev. A

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Pipeline HD Mini Series Sata ST9250311CS ST91603110CSRevision history Revision DateContents Pipeline HD Mini Series Sata Product Manual, Rev. a List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tableDrive specifications Default logical geometry LBA modeFormatted capacity Cylinders Read/write heads Sectors per track 16,383Physical characteristics Drive specificationPhysical organization Recording and interface technologySeek time Start/stop timesTypical seek times Seek times msec ReadPower specifications Voltage tolerance Typical current profileConducted noise Power-management modes Power management modesActive mode Idle modeEnvironmental specifications Shock Operating shockNonoperating shock VibrationDrive A-weighted Sound Power Levels SWL, BA AcousticsElectromagnetic immunity Test for Prominent Discrete Tones PDTsMeasurement type Specification ReliabilitySafety certification Agency certificationElectromagnetic compatibility Korean RRLFCC verification Environmental protection Corrosive environmentEuropean Union Restriction of Hazardous Substances RoHS China Restriction of Hazardous Substances RoHS DirectivePipeline HD Mini Series Sata Product Manual, Rev. a Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsDrive mounting Top cover stiffness/deflectionMeasurements shown in are in inches Serial ATA connector pin definitions SignalSerial ATA Sata interface Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard security commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Pipeline HD Mini Series Sata Product Manual, Rev. a Set Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Pipeline HD Mini Series Sata Product Manual, Rev. a Technical Support Seagate Technology support servicesPresales Support Data Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE TPI Pipeline HD Mini Series Sata Product Manual, Rev. a Page Seagate Technology LLC

ST91603110CS, ST9250311CS specifications

The Seagate ST9250311CS and ST9160311CS are notable hard drives in the field of data storage, specifically designed for reliability and performance in a range of applications, including consumer electronics and personal computing.

The ST9250311CS is a 250GB Serial ATA hard drive, while the ST9160311CS offers a larger capacity of 160GB, both providing a balance of speed and efficiency for users seeking dependable storage solutions. These drives are built to meet the demands of today’s digital content, offering ample storage for photos, videos, music, and applications.

One of the standout features of these drives is their 2.5-inch form factor, making them suitable for laptops, external enclosures, and other compact devices. The drives utilize SATA interfaces, providing faster data transfer rates compared to older IDE technologies. The SATA interface also enhances overall system performance by allowing for quicker boot-up times and faster access to stored data.

Another distinguishing characteristic of these Seagate models is their 5400 RPM rotational speed. While not the fastest in the market, this speed is well-balanced, ensuring a quieter operation and lower power consumption, which is particularly important for battery-operated devices like laptops. This energy efficiency extends the overall battery life, making it an ideal choice for mobile users who require long-lasting performance on the go.

The ST9250311CS and ST9160311CS also feature advanced data protection technologies, ensuring the integrity and safety of stored data. Their Shock Protection System helps to guard against data loss due to impacts and vibrations, while the integrated thermal management technology keeps the drives cool during operation. Additionally, data redundancy capabilities assist in minimizing the risk of data corruption.

In terms of compatibility, these drives support various operating systems, including Windows and Linux, making them a versatile option for a wide range of users. Their reliability is backed by Seagate’s reputation in the industry and comprehensive warranty options.

The Seagate ST9250311CS and ST9160311CS hard drives provide a solid blend of performance, reliability, and efficiency, catering to users in both personal and professional environments, capable of handling data-intensive tasks while ensuring long-term durability and sustained performance.
Top Page Image Contents