Seagate ST9250311CS, ST91603110CS 3 S.M.A.R.T. commands, Code in features register A.R.T. command

Page 39

4.3.3S.M.A.R.T. commands

S.M.A.R.T. provides near-term failure prediction for disc drives. When S.M.A.R.T. is enabled, the drive moni- tors predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is limited to the attributes the drive can monitor. For more information on S.M.A.R.T. commands and implementation, see the Draft ATA-8 Standard.

SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4H) that elimi- nates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at: http://seatools.seagate.com.

This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. to enable this feature. The table below shows the S.M.A.R.T. command codes that the drive uses.

Table 9:

S.M.A.R.T. commands

 

 

Code in features register

S.M.A.R.T. command

 

 

 

D0H

 

S.M.A.R.T. Read Data

D1H

 

Vendor-specific

D2H

 

S.M.A.R.T. Enable/Disable Attribute Autosave

D3H

 

S.M.A.R.T. Save Attribute Values

D4H

 

S.M.A.R.T. Execute Off-line Immediate (runs DST)

D5H

 

S.M.A.R.T. Read Log Sector

D6H

 

S.M.A.R.T. Write Log Sector

D7H

 

Vendor-specific

D8H

 

S.M.A.R.T. Enable Operations

D9H

 

S.M.A.R.T. Disable Operations

DAH

 

S.M.A.R.T. Return Status

Note. If an appropriate code is not written to the Features Register, the command is aborted and 0x04 (abort) is written to the Error register.

Pipeline HD Mini Series SATA Product Manual, Rev. A

33

Page 38 Page 40
Image 39
Page 38 Page 40
Contents ST9250311CS ST91603110CS Pipeline HD Mini Series SataRevision Date Revision historyContents Pipeline HD Mini Series Sata Product Manual, Rev. a List of Figures Page Introduction About the Serial ATA interface Specification summary table Drive specificationsDrive specifications Cylinders Read/write heads Sectors per track 16,383 Default logical geometryLBA mode Formatted capacityRecording and interface technology Physical characteristicsDrive specification Physical organizationSeek times msec Read Seek timeStart/stop times Typical seek timesPower specifications Typical current profile Conducted noiseVoltage tolerance Idle mode Power-management modesPower management modes Active modeEnvironmental specifications Vibration ShockOperating shock Nonoperating shockTest for Prominent Discrete Tones PDTs Drive A-weighted Sound Power Levels SWL, BAAcoustics Electromagnetic immunityReliability Measurement type SpecificationKorean RRL Safety certificationAgency certification Electromagnetic compatibilityFCC verification China Restriction of Hazardous Substances RoHS Directive Environmental protectionCorrosive environment European Union Restriction of Hazardous Substances RoHSPipeline HD Mini Series Sata Product Manual, Rev. a Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveTop cover stiffness/deflection Drive mountingMeasurements shown in are in inches Segment Pin Function Definition Serial ATA connector pin definitionsSignal Serial ATA Sata interfaceP10 Ground 2nd mate P11 Reserved Pin Function DefinitionCommand name Command code in hex ATA-standard commands Supported ATA commandsCommand name Command code in hex ATA-standard security commands Word Description Value Identify Device commandXx07H Description if bit is set to Bit Pipeline HD Mini Series Sata Product Manual, Rev. a Set Features command values Set Features command3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Pipeline HD Mini Series Sata Product Manual, Rev. a Seagate Technology support services Presales SupportTechnical Support Warranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index ITE TPI Pipeline HD Mini Series Sata Product Manual, Rev. a Page Seagate Technology LLC

ST91603110CS, ST9250311CS specifications

The Seagate ST9250311CS and ST9160311CS are notable hard drives in the field of data storage, specifically designed for reliability and performance in a range of applications, including consumer electronics and personal computing.

The ST9250311CS is a 250GB Serial ATA hard drive, while the ST9160311CS offers a larger capacity of 160GB, both providing a balance of speed and efficiency for users seeking dependable storage solutions. These drives are built to meet the demands of today’s digital content, offering ample storage for photos, videos, music, and applications.

One of the standout features of these drives is their 2.5-inch form factor, making them suitable for laptops, external enclosures, and other compact devices. The drives utilize SATA interfaces, providing faster data transfer rates compared to older IDE technologies. The SATA interface also enhances overall system performance by allowing for quicker boot-up times and faster access to stored data.

Another distinguishing characteristic of these Seagate models is their 5400 RPM rotational speed. While not the fastest in the market, this speed is well-balanced, ensuring a quieter operation and lower power consumption, which is particularly important for battery-operated devices like laptops. This energy efficiency extends the overall battery life, making it an ideal choice for mobile users who require long-lasting performance on the go.

The ST9250311CS and ST9160311CS also feature advanced data protection technologies, ensuring the integrity and safety of stored data. Their Shock Protection System helps to guard against data loss due to impacts and vibrations, while the integrated thermal management technology keeps the drives cool during operation. Additionally, data redundancy capabilities assist in minimizing the risk of data corruption.

In terms of compatibility, these drives support various operating systems, including Windows and Linux, making them a versatile option for a wide range of users. Their reliability is backed by Seagate’s reputation in the industry and comprehensive warranty options.

The Seagate ST9250311CS and ST9160311CS hard drives provide a solid blend of performance, reliability, and efficiency, catering to users in both personal and professional environments, capable of handling data-intensive tasks while ensuring long-term durability and sustained performance.
Top Page Image Contents