Seagate ST91603110CS, ST9250311CS manual FCC verification

Page 22

2.14.3FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually mar- keted to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursu- ant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interfer- ence to radio and television reception.

Radio and television interference. This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installa- tion. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television, which can be determined by turning the equipment on and off, you are encouraged to try one or more of the following corrective measures:

•Reorient the receiving antenna.

•Move the device to one side or the other of the radio or TV.

•Move the device farther away from the radio or TV.

•Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.

If necessary, you should consult your dealer or an experienced radio/television technician for additional sug- gestions. You may find helpful the following booklet prepared by the Federal Communications Commission: How to Identify and Resolve Radio-Television Interference Problems. This booklet is available from the Super- intendent of Documents, U.S. Government Printing Office, Washington, DC 20402. Refer to publication num- ber 004-000-00345-4.

16

Pipeline HD Mini Series SATA Product Manual, Rev. A

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Pipeline HD Mini Series Sata ST9250311CS ST91603110CSRevision history Revision DateContents Pipeline HD Mini Series Sata Product Manual, Rev. a List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tableDrive specifications Formatted capacity Default logical geometryLBA mode Cylinders Read/write heads Sectors per track 16,383Physical organization Physical characteristicsDrive specification Recording and interface technologyTypical seek times Seek timeStart/stop times Seek times msec ReadPower specifications Conducted noise Typical current profileVoltage tolerance Active mode Power-management modesPower management modes Idle modeEnvironmental specifications Nonoperating shock ShockOperating shock VibrationElectromagnetic immunity Drive A-weighted Sound Power Levels SWL, BAAcoustics Test for Prominent Discrete Tones PDTsMeasurement type Specification ReliabilityElectromagnetic compatibility Safety certificationAgency certification Korean RRLFCC verification European Union Restriction of Hazardous Substances RoHS Environmental protectionCorrosive environment China Restriction of Hazardous Substances RoHS DirectivePipeline HD Mini Series Sata Product Manual, Rev. a Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsDrive mounting Top cover stiffness/deflectionMeasurements shown in are in inches Serial ATA Sata interface Serial ATA connector pin definitionsSignal Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard security commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Pipeline HD Mini Series Sata Product Manual, Rev. a Set Features command Set Features command valuesA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Pipeline HD Mini Series Sata Product Manual, Rev. a Presales Support Seagate Technology support servicesTechnical Support Data Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index ITE TPI Pipeline HD Mini Series Sata Product Manual, Rev. a Page Seagate Technology LLC

ST91603110CS, ST9250311CS specifications

The Seagate ST9250311CS and ST9160311CS are notable hard drives in the field of data storage, specifically designed for reliability and performance in a range of applications, including consumer electronics and personal computing.

The ST9250311CS is a 250GB Serial ATA hard drive, while the ST9160311CS offers a larger capacity of 160GB, both providing a balance of speed and efficiency for users seeking dependable storage solutions. These drives are built to meet the demands of today’s digital content, offering ample storage for photos, videos, music, and applications.

One of the standout features of these drives is their 2.5-inch form factor, making them suitable for laptops, external enclosures, and other compact devices. The drives utilize SATA interfaces, providing faster data transfer rates compared to older IDE technologies. The SATA interface also enhances overall system performance by allowing for quicker boot-up times and faster access to stored data.

Another distinguishing characteristic of these Seagate models is their 5400 RPM rotational speed. While not the fastest in the market, this speed is well-balanced, ensuring a quieter operation and lower power consumption, which is particularly important for battery-operated devices like laptops. This energy efficiency extends the overall battery life, making it an ideal choice for mobile users who require long-lasting performance on the go.

The ST9250311CS and ST9160311CS also feature advanced data protection technologies, ensuring the integrity and safety of stored data. Their Shock Protection System helps to guard against data loss due to impacts and vibrations, while the integrated thermal management technology keeps the drives cool during operation. Additionally, data redundancy capabilities assist in minimizing the risk of data corruption.

In terms of compatibility, these drives support various operating systems, including Windows and Linux, making them a versatile option for a wide range of users. Their reliability is backed by Seagate’s reputation in the industry and comprehensive warranty options.

The Seagate ST9250311CS and ST9160311CS hard drives provide a solid blend of performance, reliability, and efficiency, catering to users in both personal and professional environments, capable of handling data-intensive tasks while ensuring long-term durability and sustained performance.
Top Page Image Contents