Seagate ST9100823AB, ST9808211AB manual Reliability, Agency certification, Safety certification

Page 19

2.13

Reliability

 

 

 

Measurement type

Specification

 

 

Nonrecoverable read errors

1 per 1014 bits read, max.

Mean time between failures

500,000 hours at 25°C ambient temperature

(MTBF)

 

8,760 Power On Hours/year at nominal power.

 

 

 

 

Max case temperature: 40°C at the case measurement location shown in Figure 4.

 

 

Load/Unload (U/UL)

 

25°C, 50% relative humidity

600,000 software-controlled power on/off cycles

 

 

20,000 hard power on/off cycles

32°C, 80% relative humidity

600,000 software-controlled power on/off cycles

5°C, 80% relative humidity

20,000 hard power on/off cycles

5°C, 10% relative humidity

 

55°C, 16% relative humidity

 

 

 

Service Life

5 Years

 

 

 

Warranty

 

5 Years

 

 

 

2.14Agency certification

2.14.1Safety certification

The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950 as tested by TUV North America.

2.14.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

Momentus 5400.2 Blade Server Product Manual, Rev. B

13

Page 18 Page 20
Image 19
Page 18 Page 20
Contents ST9100823AB ST9808211AB ST960822AB ST9408114AB Momentus5400.2 Blade ServerPage Contents Momentus 5400.2 Blade Server Product Manual, Rev. B List of Figures Momentus 5400.2 Blade Server Product Manual, Rev. B Momentus 5400.2 Blade Server Pata disc drive IntroductionMomentus 5400.2 Blade Server Product Manual, Rev. B Specification summary Drive specificationsSpecifications To 90% operating Physical organization Default logical geometryLBA mode Formatted capacityTechnology Specification Physical characteristicsRecording and interface technology Time to ready Typical Max Seek timeTime to ready Typical seek times msec Read WritePower specifications Conducted noise Typical current profileVoltage tolerance Environmental specifications Vibration ShockOperating shock Nonoperating shockElectromagnetic immunity AcousticsElectromagnetic immunity Drive level acousticsAgency certification Safety certificationMeasurement type Specification ReliabilityAustralian C-Tick N176 Korean RRLFCC verification Corrosive environment Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS Momentus 5400.2 Blade Server Product Manual, Rev. B Master/slave configuration Configuring and mounting the driveHandling and static discharge precautions Jumper settingsCable-select option Drive mountingCable Connector Conductor Contact Signal Name ATA interface signals and connector pinsConnector signals Connector Cable Signal Name Contact ConductorSupported commands Supported ATA commandsCommand name Command code in hex ATA-standard commands ATA-standard power-management commands Command name Command code in hexATA-standard security commands Supported commands Word Description Value Identify Device commandXx07H Bit Word Features register values Set Features commandTechnical Support Seagate Technology support servicesInternet Presales SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Numerics IndexPage TMR Momentus 5400.2 Blade Server Product Manual, Rev. B Page Seagate Technology LLC

ST9808211AB, ST9100823AB, ST9408114AB, ST960822AB specifications

The Seagate ST960822AB, ST9408114AB, ST9100823AB, and ST9808211AB are notable hard disk drives (HDDs) that have made significant contributions to data storage technology. These drives are part of Seagate's extensive lineup, known for their reliability, performance, and innovative features.

The ST960822AB is a 2.5-inch HDD with a storage capacity of 60 GB. It is designed primarily for mobile computing applications, such as laptops and external drives. This model features a low power consumption design that enhances battery life, making it an ideal choice for portable devices. Its data transfer rates are competitive for its class, ensuring fast access to files.

Next, the ST9408114AB presents a slightly higher capacity of 40 GB, also within the 2.5-inch form factor. This drive was engineered for entry-level laptops and external storage solutions. Its Fluid Dynamic Bearing (FDB) technology allows for quieter operation and reduced vibration. With a 5400 RPM speed, it provides adequate performance for everyday tasks, including document storage and multimedia playback.

The ST9100823AB steps into the spotlight with a capacity of 80 GB, catering to users requiring more storage space for games, documents, and multimedia files. This HDD offers enhanced data integrity through Seagate's Advanced Power Management technology, which reduces power consumption without sacrificing performance. The ST9100823AB's consistent performance makes it suitable for both personal and professional use.

Lastly, there is the ST9808211AB, offering 80 GB of storage in a 2.5-inch format. It leverages similar technology as its counterparts but with improved data caching algorithms that allow for quicker access to frequently used files. This HDD is also built with durability in mind, suitable for environments that may experience shocks or vibrations.

All four models incorporate Seagate's commitment to quality with a focus on reliability and efficiency. They are equipped with features that prioritize speed, noise reduction, and power efficiency, making them excellent choices for varied applications in personal computing, gaming, and mobile storage. Collectively, the ST960822AB, ST9408114AB, ST9100823AB, and ST9808211AB represent a significant advancement in hard drive technology, serving users with diverse storage needs effectively.
Top Page Image Contents