Seagate ST9100823AB, ST9808211AB manual Introduction, Momentus 5400.2 Blade Server Pata disc drive

Page 7

1.0Introduction

This manual describes the functional, mechanical and interface specifications for the following Seagate® Momentus®5400.2 Blade Server drives:

•ST9100823AB

•ST960822AB

•ST9808211AB

•ST9408114AB

These drives provide the following key features:

•5,400-RPM spindle speed and 8-Mbyte buffer combine for superior performance.

•Quiet operation. Fluid Dynamic Bearing (FDB) motor.

•High instantaneous (burst) data transfer rates (up to 100 Mbytes per second) using Ultra DMA mode 5.

•Tunneling Magnetoresistive (TMR) recording heads.

•State-of-the-art cache and on-the-fly error-correction algorithms.

•Full-track multiple-sector transfer capability without local processor intervention.

•800 Gs nonoperating shock and 250 Gs operating shock.

•SeaTools™ diagnostic software performs a drive self-test that eliminates unnecessary drive returns.

•The 3D Defense System™, which includes Drive Defense, Data Defense, and Diagnostic Defense, offers the industry’s most comprehensive protection for disc drives.

•Support for S.M.A.R.T. drive monitoring and reporting.

•Support for Read Multiple and Write Multiple commands.

•Support for autodetection of master/slave drives that use cable select (CSEL).

Figure 1. Momentus 5400.2 Blade Server PATA disc drive

Momentus 5400.2 Blade Server Product Manual, Rev. B

1

Page 6 Page 8
Image 7
Page 6 Page 8
Contents
ST9100823AB ST9808211AB ST960822AB ST9408114AB Momentus5400.2 Blade ServerPage Contents Momentus 5400.2 Blade Server Product Manual, Rev. B List of Figures Momentus 5400.2 Blade Server Product Manual, Rev. B Momentus 5400.2 Blade Server Pata disc drive IntroductionMomentus 5400.2 Blade Server Product Manual, Rev. B Specification summary Drive specificationsSpecifications To 90% operating Physical organization Default logical geometryLBA mode Formatted capacityTechnology Specification Physical characteristicsRecording and interface technology Time to ready Typical Max Seek timeTime to ready Typical seek times msec Read WritePower specifications Conducted noise Typical current profileVoltage tolerance Environmental specifications Vibration ShockOperating shock Nonoperating shockElectromagnetic immunity AcousticsElectromagnetic immunity Drive level acousticsAgency certification Safety certificationMeasurement type Specification ReliabilityAustralian C-Tick N176 Korean RRLFCC verification Corrosive environment Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS Momentus 5400.2 Blade Server Product Manual, Rev. B Master/slave configuration Configuring and mounting the driveHandling and static discharge precautions Jumper settingsCable-select option Drive mountingCable Connector Conductor Contact Signal Name ATA interface signals and connector pinsConnector signals Connector Cable Signal Name Contact ConductorSupported commands Supported ATA commandsCommand name Command code in hex ATA-standard commands ATA-standard power-management commands Command name Command code in hexATA-standard security commands Supported commands Word Description Value Identify Device commandXx07H Bit Word Features register values Set Features commandTechnical Support Seagate Technology support servicesInternet Presales SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Numerics IndexPage TMR Momentus 5400.2 Blade Server Product Manual, Rev. B Page Seagate Technology LLC
Top Page Image Contents