Seagate ST980411ASG, ST9320421ASG, ST9250421ASG manual Start/stop times, Power specifications

Page 14

2.8Start/stop times

Time to ready

Typical

Max @ 25°C

 

 

 

Power-on to Ready (sec)

4.0

8.0

 

 

 

Standby to Ready (sec)

3.0

8.0

 

 

 

2.9Power specifications

The drive receives DC power (+5V) through a native SATA power connector.

2.9.1Power consumption

Power requirements for the drives are listed in the table on page 8. Typical power measurements are based on an average of drives tested, under nominal conditions, at 25°C ambient temperature.

•Spinup power

Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed.

•Seek mode

During seek mode, the read/write actuator arm moves toward a specific position on the disc surface and does not execute a read or write operation. Servo electronics are active. Seek mode power is measured based on three random seek operations every 100 msecs. This mode is not typical.

•Read/write power and current

Read/write power is measured with the heads on track, based on three 63 sector read or write operations every 100 msecs.

•Idle mode power

Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in a random track location.

•Standby mode

During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/ write electronics are in power-down model

Table 3:

DC power

 

 

 

Power dissipation

+5V input average (25° C)

 

 

Spinup (max)

1.0 amps

 

 

 

Seek

 

2.3 watts

 

 

 

Read

 

2.1 watts

 

 

 

Write

 

2.3 watts

 

 

Idle, performance*

1.4 watts

 

 

 

Idle, active*

 

1.0 watts

 

 

Idle, low power mode*

0.75 watts

 

 

 

Standby

 

0.21 watts

 

 

 

Sleep

 

0.21 watts

 

 

 

*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

8

Momentus 7200.3 SATA Product Manual, Rev. B

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Momentus 7200.3 Sata Page Contents Momentus 7200.3 Sata Product Manual, Rev. B List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tableAFR LBA mode Formatted capacityRecording and interface technology Default logical geometryPhysical organization Cylinders Read/write heads Sectors per track 16,383Seek time Physical characteristicsDrive specification Typical seek timesPower specifications Start/stop timesVoltage tolerance Typical current profileConducted noise Active mode Power-management modesPower management modes Idle modeEnvironmental specifications Acoustics Reliability Free Fall Protection featureElectromagnetic immunity Radio frequency environmentsElectromagnetic compatibility Safety certificationAgency certification Korean BCCFCC verification China Restriction of Hazardous Substances RoHS Directive Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS Page Momentus 7200.3 Sata Product Manual, Rev. B Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingMomentus 7200.3 Sata Product Manual, Rev. B Serial ATA Sata interface Serial ATA connector pin definitionsSignal Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex Word Description Value Identify Device commandATA-standard security commands XxxxH Xx7FH Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Internet Presales Support Seagate Technology support servicesWarranty Support MySeagate Spp.seagate.com Technical SupportCall Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE Sata Momentus 7200.3 Sata Product Manual, Rev. B Page Seagate Technology LLC
Related manuals
Manual 46 pages 46.03 Kb

ST9120411AS, ST9120411ASG, ST9250421AS, ST9160411AS, ST9200423ASG specifications

Seagate has long been a prominent name in the storage industry, recognized for delivering reliable hard drives that cater to a variety of computing needs. The Seagate ST9200421AS, ST9160411ASG, ST980411ASG, ST9320421ASG, and ST9320421AS are notable hard drives that showcase the brand's commitment to performance and efficiency.

The ST9200421AS is a 2.5-inch SATA hard drive that boasts a storage capacity of 200GB. With a spindle speed of 5400 RPM, this model is optimized for low power consumption while maintaining adequate performance for everyday computing tasks. Its 8MB cache enhances data transfer rates, making it suitable for basic computing environments such as entry-level laptops.

Another model, the ST9160411ASG, also operates at a speed of 5400 RPM but offers a slightly larger storage capacity of 160GB. It incorporates advanced error correction technologies that improve data integrity and reliability. This drive is ideal for users looking to upgrade their existing storage without sacrificing battery life or performance in mobile devices.

The ST980411ASG steps up the capacity game with 160GB of storage as well but features Seagate's PowerSave technology that helps extend battery life in laptops. This is particularly beneficial for mobile users who require dependable storage while on the move. Combined with a 5400 RPM speed and 8MB cache, it balances performance with energy efficiency.

The ST9320421ASG offers a more substantial storage option of 320GB, matching the performance characteristics of its predecessors with a 5400 RPM spin rate. This drive includes features like QuietStep technology, which minimizes noise for a smoother user experience, making it excellent for quiet environments and multimedia applications.

Lastly, the ST9320421AS follows suit with similar specifications, catering to users who prioritize additional capacity alongside reliability. This model is ideal for users needing a dependable yet spacious storage solution for their laptops or compact desktops.

Overall, the Seagate ST9200421AS, ST9160411ASG, ST980411ASG, ST9320421ASG, and ST9320421AS hard drives exemplify the brand's innovation and commitment to quality. With features designed to enhance performance, efficiency, and user experience, these drives continue to be a solid choice for those seeking reliable storage solutions in various computing environments. With their varying capacities and features, users have the flexibility to select a model that best fits their storage needs while enjoying the reliability that Seagate is known for.
Top Page Image Contents