Seagate ST9200423ASG, ST980411ASG, ST9320421ASG, ST9250421ASG, ST9200421AS, ST9160411ASG Acoustics

Page 18

2.10.6.2Nonoperating shock

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 800 Gs based on a nonrepetitive half-sine shock pulse of 2 msec duration.

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 1,000 Gs based on a nonrepetitive half-sine shock pulse of 1 msec duration.

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 600 Gs based on a nonrepetitive half-sine shock pulse of 0.5 msec duration.

2.10.7Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis.

2.10.7.1Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards speci- fied in this document are specified below.

5–500 Hz

1.0 Gs (0 to peak). Max displacement may apply below 10 Hz.

2.10.7.2Nonoperating vibration

The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degrada- tion in performance when subsequently put into operation are specified below.

5–500 Hz:

5.0 Gs (0 to peak). Max displacement may apply below 22 Hz.

2.11Acoustics

Drive emission of sound is measured consistent with the ECMA-74 and its referenced standards. Testing is conducted at room temperature (approximately 25°C). Emission levels are reported as the total A-weighted sound power levers for steady state, idle, and active seeks modes of operation.

Table 5: Drive A-weighted Sound Power Levels (SWL, BA)

Idle*

Performance seek

 

 

2.3 bels (typ)

2.6 bels (typ)

2.5 bels (max)

2.7 bels (max)

 

 

*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

Test for Prominent Discrete Tones (PDTs)

Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this pro- cess is the use of the absolute threshold of hearing. Seagate uses the lower limit for the threshold curve* to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards.

*Defined as the median curve given by ISO 389-7 (Tf curve) minus 10dB at all frequencies.

12

Momentus 7200.3 SATA Product Manual, Rev. B

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Momentus 7200.3 Sata Page Contents Momentus 7200.3 Sata Product Manual, Rev. B List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tableAFR LBA mode Formatted capacityRecording and interface technology Default logical geometryPhysical organization Cylinders Read/write heads Sectors per track 16,383Seek time Physical characteristicsDrive specification Typical seek timesPower specifications Start/stop timesTypical current profile Conducted noiseVoltage tolerance Active mode Power-management modesPower management modes Idle modeEnvironmental specifications Acoustics Reliability Free Fall Protection featureElectromagnetic immunity Radio frequency environmentsElectromagnetic compatibility Safety certificationAgency certification Korean BCCFCC verification Environmental protection European Union Restriction of Hazardous Substances RoHSChina Restriction of Hazardous Substances RoHS Directive Page Momentus 7200.3 Sata Product Manual, Rev. B Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingMomentus 7200.3 Sata Product Manual, Rev. B Serial ATA Sata interface Serial ATA connector pin definitionsSignal Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex Identify Device command ATA-standard security commandsWord Description Value XxxxH Xx7FH Description if bit is set to Bit Word Bit WordSet Features command Set Features command values3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Internet Presales Support Seagate Technology support servicesWarranty Support MySeagate Spp.seagate.com Technical SupportWarranty Service Data Recovery Services Authorized Service CentersCall Center Toll-free Direct dial Index ITE Sata Momentus 7200.3 Sata Product Manual, Rev. B Page Seagate Technology LLC
Related manuals
Manual 46 pages 46.03 Kb

ST9120411AS, ST9120411ASG, ST9250421AS, ST9160411AS, ST9200423ASG specifications

Seagate has long been a prominent name in the storage industry, recognized for delivering reliable hard drives that cater to a variety of computing needs. The Seagate ST9200421AS, ST9160411ASG, ST980411ASG, ST9320421ASG, and ST9320421AS are notable hard drives that showcase the brand's commitment to performance and efficiency.

The ST9200421AS is a 2.5-inch SATA hard drive that boasts a storage capacity of 200GB. With a spindle speed of 5400 RPM, this model is optimized for low power consumption while maintaining adequate performance for everyday computing tasks. Its 8MB cache enhances data transfer rates, making it suitable for basic computing environments such as entry-level laptops.

Another model, the ST9160411ASG, also operates at a speed of 5400 RPM but offers a slightly larger storage capacity of 160GB. It incorporates advanced error correction technologies that improve data integrity and reliability. This drive is ideal for users looking to upgrade their existing storage without sacrificing battery life or performance in mobile devices.

The ST980411ASG steps up the capacity game with 160GB of storage as well but features Seagate's PowerSave technology that helps extend battery life in laptops. This is particularly beneficial for mobile users who require dependable storage while on the move. Combined with a 5400 RPM speed and 8MB cache, it balances performance with energy efficiency.

The ST9320421ASG offers a more substantial storage option of 320GB, matching the performance characteristics of its predecessors with a 5400 RPM spin rate. This drive includes features like QuietStep technology, which minimizes noise for a smoother user experience, making it excellent for quiet environments and multimedia applications.

Lastly, the ST9320421AS follows suit with similar specifications, catering to users who prioritize additional capacity alongside reliability. This model is ideal for users needing a dependable yet spacious storage solution for their laptops or compact desktops.

Overall, the Seagate ST9200421AS, ST9160411ASG, ST980411ASG, ST9320421ASG, and ST9320421AS hard drives exemplify the brand's innovation and commitment to quality. With features designed to enhance performance, efficiency, and user experience, these drives continue to be a solid choice for those seeking reliable storage solutions in various computing environments. With their varying capacities and features, users have the flexibility to select a model that best fits their storage needs while enjoying the reliability that Seagate is known for.
Top Page Image Contents