Seagate ST9200421AS manual Electromagnetic immunity, Reliability, Radio frequency environments

2.12Electromagnetic immunity

When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in the following table:

Table 6:	Radio frequency environments
			Performance	Reference
Test		Description	level	standard
Electrostatic discharge		Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV	B	EN 61000-4-2: 95
Radiated RF immunity		80 to 1,000 MHz, 3 V/m,	A	EN 61000-4-3: 96
		80% AM with 1 kHz sine		ENV 50204: 95
		900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz
Electrical fast transient		± 1 kV on AC mains, ± 0.5 kV on external I/O	B	EN 61000-4-4: 95
Surge immunity		± 1 kV differential, ± 2 kV common, AC mains	B	EN 61000-4-5: 95
Conducted RF immunity		150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz	A	EN 61000-4-6: 97
		sine
Power Frequency H-field		1 A/m, 50Hz/60Hz, 3 axes	A	EN 61000-4-8: 97
immunity
Voltage dips, interrupts		30% Reduction for 25 cycles	C	EN 61000-4-11: 94
		>95% Reduction for 250 cycles	C
		>95%, 0.5 cycles	B

2.13	Reliability
Measurement type		Specification
Nonrecoverable read errors		1 per 1014 bits read, max.
Annualized Failure Rate (AFR)		<0.48%
Load/Unload (U/UL)
25°C, 50% relative humidity		600,000 software-controlled power on/off cycles
		50,000 hard power on/off cycles
32°C, 80% relative humidity		600,000 software-controlled power on/off cycles
5°C, 80% relative humidity		50,000 hard power on/off cycles
5°C, 10% relative humidity
55°C, 16% relative humidity
Warranty		5 years on distribution units.
		To determine the warranty for a specific drive, use a web browser to access the
		following web page:
		www.seagate.com/support/service/
		From this page, click on the “Verify Your Warranty” link. You will be asked to pro-
		vide the drive serial number, model number (or part number) and country of pur-
		chase. The system will display the warranty information for your drive.

2.13.1Free Fall Protection feature

The Free Fall Protection feature provides enhanced data protection against shock events that may occur while the drive is operating. This feature is designed to decrease the likelihood of data loss by detecting a free fall event and unloading the actuator before a shock takes place in falls of >8 inches (nominal). The drive uses a 0G sensor mounted on the printed circuit board assembly (PCBA) to sense this event.

Momentus 7200.3 SATA Product Manual, Rev. B 13