Seagate ST9250421ASG manual Power-management modes, Power management modes, Active mode, Idle mode

Page 16

2.9.4Power-management modes

The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes:

Table 4:

Power management modes

 

 

 

 

 

 

 

Power modes

Heads

 

Spindle

Buffer

 

 

 

 

 

Active (operating)

Tracking

 

Rotating

Full power

 

 

 

 

 

Idle, performance

Tracking

 

Rotating

Self refresh—low power

 

 

 

 

 

 

Idle, active

 

Floating

 

Rotating

Self refresh—low power

 

 

 

 

 

Idle, low power

Parked

 

Rotating

Self refresh—low power

 

 

 

 

 

 

Standby

 

Parked

 

Stopped

Self refresh—low power

 

 

 

 

 

 

Sleep

 

Parked

 

Stopped

Self refresh—low power

 

 

 

 

 

 

•Active mode

The drive is in Active mode during the read/write and seek operations.

•Idle mode

The buffer remains enabled, and the drive accepts all commands and returns to Active mode any time disc access is necessary.

•Standby mode

The drive enters Standby mode when the host sends a Standby Immediate command. If the host has set the standby timer, the drive can also enter Standby mode automatically after the drive has been inactive for a specifiable length of time. The standby timer delay is established using a Standby or Idle command. In Standby mode, the drive buffer is in Self Refresh Low Power mode, the heads are parked and the spindle is at rest. The drive accepts all commands and returns to Active mode any time disc access is necessary.

•Sleep mode

The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the drive buffer is in Self Refresh Low Power mode, the heads are parked and the spindle is at rest. The drive leaves Sleep mode after it receives a Hard Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep mode and enters Standby mode with all current translation parameters intact.

•Idle and Standby timers

Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and begins counting down from its specified delay times to zero. If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disc access is necessary.

10

Momentus 7200.3 SATA Product Manual, Rev. B

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Momentus 7200.3 Sata Page Contents Momentus 7200.3 Sata Product Manual, Rev. B List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tableAFR LBA mode Formatted capacityDefault logical geometry Physical organizationRecording and interface technology Cylinders Read/write heads Sectors per track 16,383Physical characteristics Drive specificationSeek time Typical seek timesPower specifications Start/stop timesConducted noise Typical current profileVoltage tolerance Power-management modes Power management modesActive mode Idle modeEnvironmental specifications Acoustics Free Fall Protection feature Electromagnetic immunityReliability Radio frequency environmentsSafety certification Agency certificationElectromagnetic compatibility Korean BCCFCC verification European Union Restriction of Hazardous Substances RoHS Environmental protectionChina Restriction of Hazardous Substances RoHS Directive Page Momentus 7200.3 Sata Product Manual, Rev. B Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingMomentus 7200.3 Sata Product Manual, Rev. B Serial ATA connector pin definitions SignalSerial ATA Sata interface Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard security commands Identify Device commandWord Description Value XxxxH Xx7FH Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Seagate Technology support services Warranty Support MySeagate Spp.seagate.comInternet Presales Support Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceCall Center Toll-free Direct dial Index ITE Sata Momentus 7200.3 Sata Product Manual, Rev. B Page Seagate Technology LLC
Related manuals
Manual 46 pages 46.03 Kb

ST9120411AS, ST9120411ASG, ST9250421AS, ST9160411AS, ST9200423ASG specifications

Seagate has long been a prominent name in the storage industry, recognized for delivering reliable hard drives that cater to a variety of computing needs. The Seagate ST9200421AS, ST9160411ASG, ST980411ASG, ST9320421ASG, and ST9320421AS are notable hard drives that showcase the brand's commitment to performance and efficiency.

The ST9200421AS is a 2.5-inch SATA hard drive that boasts a storage capacity of 200GB. With a spindle speed of 5400 RPM, this model is optimized for low power consumption while maintaining adequate performance for everyday computing tasks. Its 8MB cache enhances data transfer rates, making it suitable for basic computing environments such as entry-level laptops.

Another model, the ST9160411ASG, also operates at a speed of 5400 RPM but offers a slightly larger storage capacity of 160GB. It incorporates advanced error correction technologies that improve data integrity and reliability. This drive is ideal for users looking to upgrade their existing storage without sacrificing battery life or performance in mobile devices.

The ST980411ASG steps up the capacity game with 160GB of storage as well but features Seagate's PowerSave technology that helps extend battery life in laptops. This is particularly beneficial for mobile users who require dependable storage while on the move. Combined with a 5400 RPM speed and 8MB cache, it balances performance with energy efficiency.

The ST9320421ASG offers a more substantial storage option of 320GB, matching the performance characteristics of its predecessors with a 5400 RPM spin rate. This drive includes features like QuietStep technology, which minimizes noise for a smoother user experience, making it excellent for quiet environments and multimedia applications.

Lastly, the ST9320421AS follows suit with similar specifications, catering to users who prioritize additional capacity alongside reliability. This model is ideal for users needing a dependable yet spacious storage solution for their laptops or compact desktops.

Overall, the Seagate ST9200421AS, ST9160411ASG, ST980411ASG, ST9320421ASG, and ST9320421AS hard drives exemplify the brand's innovation and commitment to quality. With features designed to enhance performance, efficiency, and user experience, these drives continue to be a solid choice for those seeking reliable storage solutions in various computing environments. With their varying capacities and features, users have the flexibility to select a model that best fits their storage needs while enjoying the reliability that Seagate is known for.
Top Page Image Contents