Seagate ST980813ASG, ST9200420ASG, ST9160823ASG, ST9120823AS Environmental specifications

Page 17

2.10Environmental specifications

2.10.1Ambient temperature

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 65°C (149°F) within the operating ambient conditions.

Above 1,000 feet (305 meters), the maximum temperature is derated linearly by 1°C every 1000 feet.

Operating:

0° to 60°C (32° to 140°F)

 

 

Nonoperating:

–40° to 70°C (–40° to 158°F)

 

 

2.10.2Temperature gradient

Operating

20°C per hour (68°F per hour max), without condensation

 

 

Nonoperating

30°C per hour (86°F per hour max)

 

 

2.10.3Humidity

2.10.3.1Relative humidity

Operating

5% to 90% noncondensing (30% per hour max)

 

 

Nonoperating

5% to 95% noncondensing (30% per hour max)

 

 

2.10.3.2Wet bulb temperature

Operating

30°C

(86°F max)

 

 

 

Nonoperating

40°C

(104°F max)

 

 

 

2.10.4Altitude

Operating

–304.8 m to 3,048 m (–1,000 ft to 10,000+ ft)

 

 

Nonoperating

–304.8 m to 12,192 m (–1,000 ft to 40,000+ ft)

 

 

Momentus 7200.2 SATA Product Manual, Rev. E

11

Image 17
Contents Momentus 7200.2 Sata Page Contents Momentus 7200.2 Sata Product Manual, Rev. E List of Figures Page Introduction About the Serial ATA Sata interface Specification summary table Drive specificationsWill display the warranty information for your drive LBA mode Default logical geometryFormatted capacity Cylinders Read/write heads Sectors per track 16,383Recording and interface technology Physical characteristicsPhysical organization Start/stop times Seek timeTypical seek times Typical seek times msec Read WritePower specifications Voltage tolerance Typical current profileConducted noise Power management modes Power-management modesActive mode Idle modeEnvironmental specifications Operating shock ShockNonoperating shock VibrationElectromagnetic immunity AcousticsDrive level acoustics Radio frequency environmentsSafety certification Free Fall Protection featureReliability Agency certificationFCC verification Korean RRLAustralian C-Tick N176 Corrosive environment超出 Environmental protectionPage Momentus 7200.2 Sata Product Manual, Rev. E Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Drive dimensionsMomentus 7200.2 Sata Product Manual, Rev. E Segment Pin Function Definition Serial ATA connector pin definitionsSerial ATA Sata interface P10 Ground 2nd mate P11 Reserved Pin Function DefinitionCommand name Command code in hex ATA-standard commands Supported ATA commandsATA-standard security commands Command name Command code in hexATA-standard power-management commands Word Description Value Identify Device commandXxxxH Bit Word Description if bit is set to Bit WordSet Features command values Set Features commandCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Momentus 7200.2 Sata Product Manual, Rev. E Internet Seagate Technology support servicesPresales Support Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE Sata Momentus 7200.2 Sata Product Manual, Rev. E Page Seagate Technology LLC