Seagate ST940814AS, ST980811AS, ST960813AS Reliability, Agency certification, Safety certification

Page 20

2.13

Reliability

 

 

 

Measurement type

Specification

 

 

Nonrecoverable read errors

1 per 1014 bits read, max.

Annualized Failure Rate (AFR)

<0.60%

 

 

Load/Unload (U/UL)

 

25°C, 50% relative humidity

600,000 software-controlled power on/off cycles

 

 

20,000 hard power on/off cycles

32°C, 80% relative humidity

600,000 software-controlled power on/off cycles

5°C, 80% relative humidity

20,000 hard power on/off cycles

5°C, 10% relative humidity

 

55°C, 16% relative humidity

 

 

 

 

Warranty

 

5 years on distribution units.

 

 

To determine the warranty for a specific drive, use a web browser to access the

 

 

following web page:

 

 

www.seagate.com/support/service/

 

 

From this page, click on the “Verify Your Warranty” link. You will be asked to pro-

 

 

vide the drive serial number, model number (or part number) and country of pur-

 

 

chase. The system will display the warranty information for your drive.

 

 

 

2.14Agency certification

2.14.1Safety certification

The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950 as tested by TUV North America.

2.14.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

14

Momentus 5400.3 SATA Product Manual, Rev. D

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Momentus 5400.3 Sata Page Contents Momentus 5400.3 Sata Product Manual, Rev. D List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tableDrive specifications Default logical geometry LBA modeFormatted capacity Cylinders Read/write heads Sectors per track 16,383Physical characteristics Drive specificationPhysical organization Recording and interface technologySeek time Start/stop timesTypical seek times Typical seek times msec Read WritePower specifications Typical current profile Deferred spinupConducted noise Voltage toleranceEnvironmental specifications Temperature gradient Wet bulb temperatureHumidity Relative humidity AltitudeShock Operating shockNonoperating shock VibrationAcoustics Electromagnetic immunityDrive level acoustics Radio frequency environmentsSafety certification Measurement type SpecificationReliability Agency certificationFCC verification Korean RRLAustralian C-Tick N176 European Union Restriction of Hazardous Substances RoHS Environmental protectionCorrosive environment Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingMomentus 5400.3 Sata Product Manual, Rev. D Serial ATA connector pin definitions SignalSerial ATA Sata interface Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard security commandsMomentus 5400.3 Sata Product Manual, Rev. D Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Seagate Technology support services InternetPresales Support Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE Sata Momentus 5400.3 Sata Product Manual, Rev. D Page Seagate Technology LLC

ST960813AS, ST9100828AS, ST9160821AS, ST9120822AS, ST980811AS specifications

The Seagate hard drives ST9120822AS, ST960813AS, ST980811AS, ST9100828AS, and ST940814AS represent a solid lineup of storage solutions designed primarily for personal computers and external storage applications. Each of these models showcases a blend of performance, reliability, and innovative technology that caters to a variety of user needs.

The ST9120822AS is a 120GB SATA drive known for its advanced data storage capabilities and a 7200 RPM spindle speed, delivering quick access times and enhanced performance for everyday computing tasks. Its Native Command Queuing (NCQ) technology optimizes the order of read and write commands sent to the drive, which significantly boosts performance, especially in multi-tasking environments. The drive is also equipped with an 8MB cache buffer that assists in speeding up data retrieval processes.

Moving up in capacity, the ST960813AS offers 60GB of storage, featuring the same 7200 RPM performance as its smaller sibling. It also benefits from NCQ technology, making it suitable for more demanding applications. This drive excels in scenarios where fast data access is essential, such as gaming and multimedia applications.

The ST980811AS provides 80GB of storage capacity. It shares many core features with its counterparts, including a 7200 RPM spindle speed and an 8MB cache that enhances data throughput. The reliability factor is paramount in these drives, as they come with built-in features designed to minimize data loss, such as error correction codes and advanced formatting technology.

The ST9100828AS boasts an impressive 100GB of capacity, providing ample space for storing large files, applications, and multimedia content. It combines high performance with enhanced reliability, ideal for users who require a dependable storage solution for their important data.

Finally, the ST940814AS offers a 40GB size capability. Despite its smaller storage size, it maintains high performance levels with a 7200 RPM speed and 8MB cache, making it a viable option for those looking for a balance between efficiency and space.

In summary, the Seagate ST9120822AS, ST960813AS, ST980811AS, ST9100828AS, and ST940814AS models encapsulate the essence of dependable storage with their various capacities and robust performance features. These drives reflect a commitment to quality and innovation, ensuring users can rely on them for their data storage and access needs in both personal and professional environments.
Top Page Image Contents