4.2.2Format command execution time for 512-byte sectors (minutes)
|
| ST973401SS | ST936701SS |
|
Maximum (with verify) | 52 | 26 |
| |
Maximum (without verify) | 26 | 13 |
| |
4.2.3 | General performance characteristics |
| ||
Minimum sector interleave |
|
| 1 to 1 | |
Data buffer to/from disc media (one |
| |||
Minimum |
|
| 63 MBytes/sec | |
Maximum |
|
| 94 MBytes/sec | |
SAS Interface maximum instantaneous transfer rate |
| 300 Mbytes/sec* per | ||
|
|
|
| port (dual port = 600 |
|
|
|
| Mbytes/sec*) |
Logical block sizes |
|
|
| |
Default is |
|
| ||
Variable 512 to 528 bytes per sector in evenly divisible by 4 number |
| |||
of bytes per sector (512, 516, 520, 524, or 528). If n (number of bytes |
| |||
per sector is not divisible by 4, the next lowest number that is devisi- |
| |||
ble by 4 will be used. |
|
|
| |
Read/write consecutive sectors on a track |
| Yes | ||
Flaw reallocation performance impact (for flaws reallocated at format time | Negligible | |||
using the spare sectors per sparing zone reallocation scheme.) |
| |||
Average rotational latency |
|
| 3.0 msec |
*Assumes no errors and no relocated logical blocks. Rate measured from the start of the first logi- cal block transfer to or from the host.
12 | Savvio SAS Product Manual, Rev. D |