Seagate ST3000NC002, ST1000NC001, ST1000NC000 manual Altitude, Shock, Vibration, Non-operating

Page 22

www.seagate.com

2.9.3Altitude

Operating

–304.80 m to 3048 m (–1000 ft. to 10,000+ ft.)

 

 

Non-operating

–304.80 m to 12,192 m (–1000 ft. to 40,000+ ft.)

 

 

2.9.4Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis.

2.9.4.1Operating shock

These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 70 Gs (read) and 40 Gs (write) based on half-sine shock pulses of 2 ms during read operations. Shocks should not be repeated more than two times per second.

2.9.4.2Non-operating shock

3TB, 2TB and 1TB models

The non-operating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 300 Gs based on a non-repetitive half-sine shock pulse of 2 ms duration.

2.9.5Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis.

2.9.5.1Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards specified in this document are specified below.

5Hz to 22Hz

0.25 Gs

 

 

22Hz to 350Hz

0.50 Gs

 

 

350Hz to 500Hz

0.25 Gs

 

 

20 - 1500Hz

12.5 rads/s2 w/RVFF

*(RROV)

 

 

 

* Rotary Random Operating Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis. Throughput may vary if improperly mounted.

2.9.5.2Non-operating vibration

The maximum non-operating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below.

10Hz to 500Hz Linear Random

4.9 Grms ref

Constellation CS Serial ATA Product Manual, Rev. C

17

Page 21 Page 23
Image 22
Page 21 Page 23
Contents ConstellationCS Serial ATA Document Revision History Revision Date Description of ChangeContents Sata Interface Figures Seagate Technology Support Services Introduction About the Sata interface Drive Specifications Specification summary tablesModel Formatted capacity Guaranteed sectors Bytes per sector Formatted capacityPhysical characteristics LBA modeDefault logical geometry LBA modeSeek time Power specificationsPower consumption Start/stop times3TB Drive DC power requirements Peak operating current sequential writeTypical current profiles 3TB model current profile 2TB model current profile 1TB model current profile Conducted noise Voltage tolerancePower-management modes Power modes Heads Spindle BufferPower Condition Name Power Condition ID Description Extended Power Conditions PowerChoiceTMPowerChoice is invoked using one of two methods PowerChoice Supported Extended Power Condition Indentifiers Power Condition Name Manufacturer Default Timer ValuesEPC Subcommands Descriptions Power Condition Power Condition Name IdentifiersHumidity Ambient temperatureEnvironmental limits OperatingVibration AltitudeShock Non-operatingTest for Prominent Discrete Tones PDTs AcousticsElectromagnetic immunity Agency certification Safety certification Electromagnetic compatibilityKorean RRL FCC verificationAustralian C-Tick N176 China Restriction of Hazardous Substances RoHS Directive Product warrantyEnvironmental protection Corrosive environmentStorage ShippingProduct repair and return information Configuring the drive Handling and static-discharge precautionsSata cables and connectors Mounting dimensions Drive mountingSanitize Feature Set on SED Drives Power requirementsATA Security Erase Unit Command on SED Sata drives Data encryptionSata Interface Hot-Plug compatibilitySata device plug connector pin definitions Sata connector pin definitionsSupported ATA commands Command name Command code in hexF1H Identify Device command Word Description ValueBit Word 69-74Smart error login is supported Set Features command 0CH3 S.M.A.R.T. commands Code in features register A.R.T. commandIndex Constellation CS Serial ATA Product Manual, Rev. CConstellation CS Serial ATA Product Manual, Rev. C Constellation CS Serial ATA Product Manual, Rev. C Seagate Technology LLC Americas
Top Page Image Contents