Seagate ST1000NC000, ST1000NC001, ST2000NC001, ST2000NC000 manual Smart error login is supported

Page 37

www.seagate.com

	Bit	Word 84

	0	SMART error login is supported.

	1	SMART self-test is supported.

	2	Media serial number is supported.

	3	Media Card Pass Through Command feature set is supported.

	4	Streaming feature set is supported.

	5	GPL feature set is supported.

	6	WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT commands are supported.

	7	WRITE DMA QUEUED FUA EXT command is supported.

	8	64-bit World Wide Name is supported.

	9-10	Obsolete.

	11-12	Reserved for TLC.

	13	IDLE IMMEDIATE command with IUNLOAD feature is supported.

	14	Shall be set to 1.

	15	Shall be cleared to 0.

	Bit	Word 88

	0	Ultra DMA mode 0 is supported.

	1	Ultra DMA mode 1 is supported.

	2	Ultra DMA mode 2 is supported.

	3	Ultra DMA mode 3 is supported.

	4	Ultra DMA mode 4 is supported.

	5	Ultra DMA mode 5 is supported.

	6	Ultra DMA mode 6 is supported.

	8	Ultra DMA mode 0 is currently active.

	9	Ultra DMA mode 1 is currently active.

	10	Ultra DMA mode 2 is currently active.

	11	Ultra DMA mode 3 is currently active.

	12	Ultra DMA mode 4 is currently active.

	13	Ultra DMA mode 5 is currently active.

	14	Ultra DMA mode 6 is currently active.

Constellation CS Serial ATA Product Manual, Rev. C

32

Image 37

Contents ConstellationCS Serial ATA Revision Date Description of Change Document Revision HistoryContents Sata Interface Figures Seagate Technology Support Services Introduction About the Sata interface Specification summary tables Drive SpecificationsFormatted capacity Model Formatted capacity Guaranteed sectors Bytes per sectorDefault logical geometry LBA modePhysical characteristics LBA modePower consumption Power specificationsSeek time Start/stop timesPeak operating current sequential write 3TB Drive DC power requirementsTypical current profiles 3TB model current profile 2TB model current profile 1TB model current profile Voltage tolerance Conducted noisePower modes Heads Spindle Buffer Power-management modesPower Condition Name Power Condition ID Description Extended Power Conditions PowerChoiceTMPowerChoice is invoked using one of two methods EPC Subcommands Descriptions Power Condition Name Manufacturer Default Timer ValuesPowerChoice Supported Extended Power Condition Indentifiers Power Condition Power Condition Name IdentifiersEnvironmental limits Ambient temperatureHumidity OperatingShock AltitudeVibration Non-operatingTest for Prominent Discrete Tones PDTs AcousticsElectromagnetic immunity Electromagnetic compatibility Agency certification Safety certificationKorean RRL FCC verificationAustralian C-Tick N176 Environmental protection Product warrantyChina Restriction of Hazardous Substances RoHS Directive Corrosive environmentStorage ShippingProduct repair and return information Configuring the drive Handling and static-discharge precautionsSata cables and connectors Drive mounting Mounting dimensionsATA Security Erase Unit Command on SED Sata drives Power requirementsSanitize Feature Set on SED Drives Data encryptionHot-Plug compatibility Sata InterfaceSata connector pin definitions Sata device plug connector pin definitionsCommand name Command code in hex Supported ATA commandsF1H Word Description Value Identify Device command69-74 Bit WordSmart error login is supported 0CH Set Features commandCode in features register A.R.T. command 3 S.M.A.R.T. commandsConstellation CS Serial ATA Product Manual, Rev. C IndexConstellation CS Serial ATA Product Manual, Rev. C Constellation CS Serial ATA Product Manual, Rev. C Americas Seagate Technology LLC